Turning A Hair Stick Without A Lathe

Check out this video for a tutorial on how to hold up your hair with a pencil or hair stick: https://youtu.be/yjtFUtOtjW8

Check out my blog at https://www.wilkerdos.com/

Facebook: https://www.facebook.com/wilkerdos

Instagram: https://www.instagram.com/wilker_dos/

Patreon: https://www.patreon.com/user?u=257047

Check out my awesome sponsor Triton Tools!: http://www.tritontools.com/en-US

Things I Used in This Project:

Belt Sander: https://goo.gl/SFfNTy

So when I went to Atlanta, a viewer was very kind enough to bring you two scraps of zebrawood, and so I'm going to take a little bit of this one today and try to make a hair stick. A hair stick is just a decorative stick that I used to hold up my hair, so I'm going to get a little resourceful on this one because I don't have a lathe yet so, let's get going so. The first thing I did was take the piece over to my table saw and cut a strip that was roughly about 1/4 by 1/4. I don't have extremely thick hair, so I left mine, somewhat slim and with no laid. I grabbed my belt sander and clamped it down to my workbench. Then I simply took my stick and started rounding over all of the edges. This might seem like a tedious process, but it actually went very quickly and I found that the trick was to just constantly keep it moving so that it wouldn't create uneven wear. I would first hold the piece of wood and round over one side. Then I would flip it around and round over the other. Once I had the entire thing somewhat, even and rounded, I started tapering down one side into a point. Now I know most of my viewers are men, and so you probably have no idea, but if you're making hair sticks, then they work best if they have a really decent point on the end, that's why pencils work so well. So once I develop the point, then I use that as a reference to start shaping the rest of the hair. Stick I wanted mine just be a kind of a slow taper up to somewhat of a thicker body. Now at this point, the stick is longer than what I'm eventually going to need, but I wanted it to be this way so that I would have something hold on to and really this is a quick process, but it did just take a lot of sanding away And then holding it up and looking at the shape of it, then sanding away a little bit more after I got the body where I wanted it. I was just about to cut it, so the size whenever I thought, maybe a 45-degree cut on the end, would look a little bit fancier. So I moved my mitre over and chopped off the end, making sure to lower the blade, nice and slow so that it would make a clean cut instead of breaking the thin material, then just to clean it up slightly. I went back to the belt sander. Alright time to test it out now, if you're, a woman or a man and and are interested in learning, how to use a hair stick to hold up your hair, then I have made a separate video explaining how I personally do it. I have left you a link to that video in the description now. I think Turner's typically finished their round projects on the lathe, but since I don't have one, I ended up rigging up something from scraps to hold the hair stick. While I applied the shellac finish and basically my contraption here, I can just slightly apply pressure on the top and it will hold it in place. While I come through with the brush, then I would let it sit for about 30 minutes and then apply another coat. So it's nothing fancy, but it is something that I really wanted and it's just always an amazing feeling being able to make something that I want. So I wasn't going to make a video on this because it's just a simple little thing that I wanted, but I decided to go ahead because I thought it was a good opportunity to address a comment that I've been getting a lot. And that's. I don't have a SHOP full of tools or I don't have this tool or this jig that you're using. So I can't do that and the number one thing that I tell people getting into the Hobby whenever they ask for advice is be or source'fl, and I think, if you're motivated to figure out how to build something or make something that you want. And that's going to lead you into being resourceful, I don't have a lathe, but I wanted this, and so I thought well I'll. Just try using the belt sander and sure enough. It worked and I now have a hair. Stick the good thing about tools and making stuff is there's not ever just one way to do something, it might be a harder way. It might be a more time-consuming way, but at the end of the day, if you really want to get something done, I assure you there's a way to do it. So big. Thank you to Daniel for giving me the pieces of zebra wood that I created this with. Then your comments below, and I will see you all next time -

GET HANDS DIRTY: Cute and simple project and I like your message for encouraging people to do stuff even when they (us) don't have THE tool. :)

Carpintero en casa: Congratulations April....very nice project ... it is easy for husbands or boyfriends give away their ladies ...They can also record their names there, on wood !

Frank Jenkins: Young lady, you are an inspiration to a lot of people.......including this old man. Even though I obviously have no need for a hair stick, I will try to make some of these for my wife and her friends using your method. Thanks again! God bless our TEXAS women!!

Wood By Wright: NICE! I love the message at the nend. well done. where there is a will there is always a way.

Laura Kampf: great advice april! being resourcefull really is key to being productive...even IF you have a shop full of tools :) very motivational!

W: Thanks April, just made one for my wife and she melted, so nice. Thinking about getting some fancy wood for a second one. Thanks!

Jasvir Ramlall: Cute project April. I love your videos. Really inspiring. I am still just starting out with the hobby but I really enjoy watching your videos and seeing how much you can do with woodworking!

Christal Martin: Hey girl!! Love the idea!! Started watching your channel and I definitely love it :) look forward to more!!

Perpetualjon: That's actually pretty cool! From the title, I was guessing that you were going to clamp down a drill and turn it that way. This was a good example of working with what you have. Also, I'm growing my hair out so this may be useful soon!! Great little video.

Noelle Montalvo: Hi April, I live in hair sticks. I'm always telling my friends, if they ever see good ones (very hard to find btw) buy it for me. I never thought of making one myself. Thanks for the inspiration and keep up the good work.

Roy Wrenn: Awesome job April! I was always taught that if you need something you will find a way to get it. Keep up the great work Roy

Frank Knockleby: You are definitely an inspiration for many new woodworkers. One of the other channels that I follow is a professional woodworker, an he doesn't have a lathe either. He makes various jigs to use his current equipment for his projects, showing that you don't need fancy tools if you have ingenuity. Watching him make bowls with a drill and a tablespoon blew my mind the first time, and so do some of your projects. Keep them coming.

R. Mitchell: I love your video! You are very empowering, and a great teacher! 'When there is a will there is a way...' I agree with being resourceful, and the whole 'you can do it ' attitude. Thank you April!

sam karimzad: Thank you so much for your wonderful videos. I don't use hairpins, but I do make them. Here are couple tips that maybe useful for your next built. 1.Use a pencil sharpener to form the point. 2. chuck the rough lumber in your cordless drill. Then run it against your belt sander while rotating it with the drill. This makes the process go faster and a little safer.

Neathway: Before you showed the sander, clamped to the table, I was thinking "Drill press, low(ish) speed, piece of sand paper". Of course, I was thinking with the tools I have and not considering what you may have in your shop. Good job. I also like the point you made, at the end. Basically, completing any project, comes down to determination, imagination, and, resourcefulness.

Matthew Diresta: so cool to make your own hair sticks! makes me want to grow out my hair!

Josh Herzberger: Great little project! Just a suggestion, next time, put the stick in a drill so it can spin when you sand it down. It would make it easier on you and get your hands away from the belt sander a little.

railway31: I liked the video April thank you for sharing it. This is what I love about your channel you may not have every tool like Norm Abraham but you are able to find another way of doing it and in a way that is possible for anyone to try. I do think you could start a line in Harry Potter wands but please don't turn Cody into a frog hehe keep up the great work April it is always a pleasure to watch your videos. Darren

Toby Kennedy: I made some chops sticks, similar to this, by chucking the sticks into my drill and sanding them down. It took a while, but they came out great! I love the zebra wood look!

secretagb: I'm a male woodworking hobbyist and I really like your channel.. Even stuff like this not exactly geared towards me. Your creativity and use of what you have is inspiring! Keep being awesome!

Ellen Mac: Hi April! I enjoyed your video! I am itching to do this kind of thing, but I have no way to cut my wood! I have a belt sander and soon, a scroll saw. I am hoping I can figure out a way.......you inspired me!!

Gib Clark: looks cool ! Great you're taking time to inspire folks not having a bunch of tools yet

sanityfalling: I feel like that might have been kind of fiddly on the lathe anyways, it's hard to turn smaller spindles without some tiny lathe tools. I feel like it being a bit rough suits this particular project well and it probably works better too as the lathe would have made it really rounded probably wouldn't hold hair as well.

Brian Prusa: Love your positive attitude and your hard work! Great vid. I might have to make one even though I'm about to chop my hair off.

2300Kenzie: I turned one out of an exotic wood for my wife's birthday.  I was able to put a fancy end to get better grip and a slight swell on the pointed end to prevent falling out.   It is a nice and easy project.

Betsye Parnell: Nice! I have made sticks with a sander and a lathe. Each has its own unique properties and both work well.

Steven Kofoed: Thanks for the inspiration. I am going to make a few for my daughter. You are always so creative. Thanks

kevin: Thanks April. I was needing one of these for my hair. Lol. My hair hasn't been below my ears since I entered the Air Force back in 1984. . All kidding aside, thank-you for all the content. I always look forward to your videos.

mellowfellow9: Getting into hand tools, I felt like i always ~needed~ specialized tool. Truth be told, I just wanted them. It was a beautiful day when I simply told myself: Use what you have, it's about what you make - not the tools you buy. I did recently use Laura Kampf's method of using a drill to do some minor lathe work... resourceful! Great principals to live by april!

Mark Lindsay CNC: Nice little scrap wood project. My daughters and granddaughters will love 'em. As for the "contraption" you came up with to hold it for finishing, it looks like it worked a treat. Google "welder's third hand." They're fairly easy to make, and come in handy for just this situation, among a whole slew of others. I have to tell you that you really nailed it when you were talking about being resourceful when it comes to getting things done. You don't need a shop full of tools to do something. You found one way to do what you needed to do, and the comments here are full of other ways to do it. We all have our favorite tools and methods. But you were spot on when you said that there's not really any single way to do something, and that a person's motivation is a big part of it. I mean think about it - if you really want something, you'll figure out a way to do it, get it, make it, or whatever. You may not always succeed or succeed on the first try, but if you really want it, you won't let anything get in the way of trying. Great video! Thanks!

Thomas Verga: April, another great video, not just for the design, but also for the point about being resourceful. I am helping a student build a variation of the "Benjamin Seaton Tool till. He is building the drawers and managed to get one of the drawer backs stuck in the slot for it.We played around for several minutes and could not get it out. Both of our hands were to bid to be able to fit all the way into the slot. Finally I went and grabbed a 3" drywall screw and was able to get a couple of turns into the center of the back. This gave us a handle and the back came out with a gentle tug. He told me "Dang I've got a lot to learn" I told him that made two of us.Thank you for the work you do.

Pocahontas McDonald: Very cool. I need to make a bunch of those for myself. I use wooden chop sticks and sand the splinters down. I like the fatter one you made much better. Great job. Great idea. I might try making them out of small tree limbs so I don't have to do all that sanding lol Thanks for the idea.

Simple DIYr: I love how use come up with ways to use tools for other stuff. I use my belt sander for just about everything but what it was meant to be used for ;-) I use it most for rounding edges.

Norner: Great motivational speech at the end.. that's the spirit you should always have. If there's a will there's a way! Not needing a hair stick but great project anyway ;)

Rick Measham: There's something freaking awesome about making something you actually want. Not just yet-another-box that you'll find a use for. Or a hatstand because then you could hang your hats if you remember. But something actually, instantly useful. A couple of weeks ago I was noticing my favorite wooden kitchen spatula was getting old, worn and stained and was sad. I love that thing. Then I remembered I had some quarter inch red oak and a bandsaw and a sander. So I traced it, cut it, smoothed it and finished it. Now I have my comfortable awesome spatula back in mint condition. AND I MADE IT.

Matthew Lovell: That's a great wee project. I really appreciate the thought behind this that you shared at the end. Thanks. :)

Bor the Wolf: small parts can be easily sanded round with a drill fixed in a vise, or with a drill press. The trick works for for small metal parts too, but use a file rather than sand paper.

Richard Nordell: Great work, thanks for taking the time and sharing!!

Phill Anton: April! Just discovered your channel. You are awesome. The hairstick on the belt sander LOL! You have more skills/patience with that thing than most of the guys I work with. Very impressive. Can i be so bold as to offer a tip? Take it or leave it :) When you run a piece through the tablesaw, keep that baby going all the way through and bring it around the blade instead of passing backwards between the fence and blade for your return. If you ever get tired or lose concentration for a split second you are very likely to get a board in your stomach if you wobble at all. Cool cool cool thanks for being cool

Wildman Tech: Even on something this small I might not use a lathe. I have a 5/8" chuck in my drill press and that works really well for turning smaller stuff like this.

Austin Reynolds: As a man with short hair, I watched this video hoping to gain some random tip or trick, and sure enough! Your method of securing the piece for finishing is genius! I'll be using it in the future.

Rafael Santos: You should make yourself a dowel plate for next time :) I'd imagine that gotta be faster (and also create less sawdust) than sanding all that material away. Also, have you tried using a spoke shave or is that too corse of a tool for such a small project?

Steve 1961P.: I like it!!! My mind went straight to the belt sander to make the extended end round and then put it into a drill and spin it while holding it to the sander... I bet you could make a bunch pretty quickly like that... Now for the exotic woods!! lol...

Miniebees: you're so inspirational!!! love seeing your work too! !!

Drew Maggio: great idea using your belt sander! when i need a lathe, sand paper, files, and sticking it in a drill press works just as well. Ive even seen people use cordless drills...

JOHN CURRIER: "No lathe.... yet." I love it. A true tool nut. The world would be such a great place if there were more tool nuts!

2300Kenzie: You might want to change to a rubber ring for the shop (Qalo, Saferingz, Enso, etc) or make one out of wood.  Yours is too pretty to have that close to sandpaper.  I've seen some nightmares from metal rings in the workplace.

TSH: The last thing you said about being resourceful is very true! I started out with a cordless dril, a jigsaw and an orbital sander or whatever it's called.. almost al my friends told me I couldn't start out with those tools, and yet, I made perfect doors with it, an outside kitchen and even some stairs.. If tou really want to get somewhere, you will get there

cutelittledevil88: This is great, i plan on working with bone and am unsure about turning on a lathe (just got one second hand) it is nice to have an alternative option.

Philipe Do Carmo: Hi April I like the idea very cool , next time try to sand the piece the other way around would be much safer to sand with the tip towards the rotation direction . Congrats came out nice .

David Johnston: Awesome job, love your vids. I'm a guy, long hair and often find myself in the shop with no hair stick. They are littered eslewhere around my house but never in the shop when I need one, go figure. Right? Like you, I'll start with a square length and then round roughly 1" or so of one end. I'll start on the platen of the belt sander but as I near round I move to the open space between the platen and the roller. It's more forgiving for making rounds. Once I have it rounded as evenly as I can, I chuck it in my cordless drill and back to the belt sander. I run the rotation of the drill opposite of the rotation of the belt. Proceed with tapering with your hand held lathe. Just a variation for those making do with tools on hand.

Allurade: For more intricate lathe projects, you could also try rounding an end over on the belt sander and putting it into a drill press. I think Steve Ramsay (maybe Garage Woodworks, I can't recall) did that for Christmas ornaments.

Pin Circle: Clever idea using a belt sander. Very resourceful. You gave me an idea to convert my polisher/sander into a stationary benchtop sander.

Veronica: Yay =) I have a sander, never thought about using it for something like this =) Thanks for sharing =)

Salvation Border Country: The hair stick might be a nice present for my sisters or a salable product online. What really caught my eye was the jig you made to hold the piece while you stained it.

ogenmatic: You can also mount (shorter) dowels & such in a drill press chuck for light "turning"

Craig Mckinney: Here's a way to speed up the process: chuck your piece up in a 1/2 inch drill. Spin it against the moving belt and quickly sand down to the profile you want. I like to watch your solutions. Keep them coming.

Pramlochana Dhara: wow! Simple but sweet. I love this.

steve647my: You have wisdom far beyond your years. You tell people the way things are and do it in such a manner that you sound like a friend of many years. Your techniques make everything seem so simple, yet it is right to the point. Love the zebra wood. Keep the video's coming as I look forward to watching you tackle a project and seeing the end product.

J Allred: My wife and I enjoy your vids. Thanks for the info you provide. I do have one suggestion for you and it may have been said, but I am too lazy to read through 213 comments. You might want to look into some type of breathing protection especially when working with exotic woods. This is something that I have learned form personal experience. Some exotics can by highly irritating to the respiratory system and sometimes are slow to develop. Thanks Again.

Marie Meyer: Nice video April, I really like the jig to hold the piece for finishing.

Troy Andrews: you look amazing with your hair down but i do understand the safety aspect. Very cool and resourceful way of doing things i once made a toilet paper holder out of squad stock by plaining it round that was an effort .

Xena Callisto: I'm a girl and I would love woodworking as a hobby. Wish woodworking and welding were viewed as girly, looks so fun!

Michael Fulton: some of the best work I've done is when I didn't have the right tool to do the work. I had to think outside of the box and figure out a different way to do the task at hand. Nice work April

Dawsie: My Dad gave me his old drill which Mum bought in in 1972 from Black and Decker and it still works well :-) it only goes in one direction which is fine. It works well for small wood turning projects like hair sticks and pen blanks :-) the drill has to be a plug mains as the batteries ones done have the same grunt needed for turning wood or in my case polymer clay which I cover pen blanks :-) but I am going to give the hair stick a go as I am always using my pencils for the job :-)

Elizabeth Suggs: You are the best. Thanks for your videos, your story and the inspiring words.

TomsDreamshop Worx: So I won't suggest a drill :). Your way worked just fine and I have done similar myself. As to a different approach to store away in the brain if ever needed. Set up your router table with the appropriate round over bit and rout all four sides of a square. The catch is you leave a bit of square at each end to reference it as you turn to each side. It also gives you a spot to hold on to. Just cut off the square ends when your done.

Golden.: Houston 30 year old girl here that's about to try to convert a portable building into a tiny house. I am learning so much from you. You give me confidence, thanks for being such an inspiration!!

Skips Builds: Cool video. It's fun to see something different and original!

gac914: Three words for ya: Harbor Freight Lathe!! VERY reasonable, and you'd be able to turn all kinds of that stuff!! Great job on your project, as usual!!!

dav snow: I think this video and the complimentary one on how to wear a hair stick might actually introduce a lot of women and girls to your channel and the (still) "revolutionary idea" that girls can make stuff using power tools bigger than a cordless drill. I hope so, because we all benefit from such diversity.

Sarah G: I was in need of a hair stick and all I have is a pencil. That reminded me of when I tried to whittle a bit as a kid. I tried it for the first time in forever with just a pencil and some scissors (yes lol I know) and man, I forgot how nice it is to work with my hands; even if I have to use very rudimentary tools. You've inspired me to 'get resourceful' and pick up my old tools again :)

Mike McAuliffe: I watch you because you are resourceful. Keep building things you want, those projects are your best videos.

Chad Tuggle: My wife always uses chopsticks for hair sticks. Thanks for this video, now I've got something I can build her :)

Aurora Gonzales: That's really cool! Love it

Jon: I was hoping to see you use your router table setup to round over the edges. Interesting use of your belt sander.

Tim Hyatt: nice project......there's also the process used by sashimono crafters in japan making fine chopstick sets. instead of so much sanding, they will use planes to remove the bulk of the material, with very little sanding down towards the end.... Do have to be a little careful with dust on those exotic hardwoods...some of them can cause serious reactions if you breathe in the dust.....

Hans de Groot: Let me guess what your device is: You can do it if you really want. It is very satisfactory to make things with only a few tools and being inventive. Cool project.

CrankyPants: That's a pretty one; I like the grain. I've only used pencils, too.

Frank Fitzpatrick: Try spinning the piece in a drill April when you're sanding it at will speed up the process and give great control of the shape too.

Okto Putsch: Never took time to make my own models because i only use old food chopsticks, but i really should give it a try, _by pure coquetry_ ^^

Bear Fruit: Hey April if your gonna try to do it again try putting the wood in a drill (like a drill bit) and you can spin it while putting it on the sander

Mike O'Brien: I don't have much use for a hair stick but your message was timeless. In wood working or life in general, there are many ways to complete any task. Use what is available to you. I have a shop full of tools (I'm sort of a tool junkie) but the ability to problem solve is the best tool in the shop.

Jeff Bristow: I made some hair things for my wife, and a few family members. When I made the sticks, I just chucked the stick up in my drill press, set it to its highest speed, and let it spin. it's not as good as a real lathe, but almost.

Krafty Beard: Resourcefulness FTW ;) I Don't have a lathe either, but have put materials into a drill and then taken them to a sander or an angle grinder for metal to turn them, not perfect but it does work!

ksp1278: Very good example of how you can find a way even if you don't have lots of tools. Personally I would have hooked a shop vac up to the sander and worn a mask. But my shop is tiny so maybe dust is more a problem for me than it is for you.

Ryan Nutter: I'm glad to see I'm not the only one who clamps their belt sander upside down. Lol. I actually enjoy finding ways to use alternate tools for jobs like this. It"s also a good way to learn the actual process of how things work in the first place. I also find I appreciate convenience a TON more when I eventually do get the right tool for the job. Awesome video!

Peter Stewart: Looks great April! Good job!

Simon Hopkins: cool project. I only have 1 question have you got really good air cleaning system or were you breathing in all that sanding dust. Please take care x

John Thompson II: If your using wood this small enough in diameter you can always put it in the chuck of a drill. Then it would spin more evenly as you sanded.

Dosbomber: Well I was going to jump into the comments section to suggest chucking the stick into a drill, but it seems everyone else had the same idea.. ah well. Maybe when you get your lathe, you can turn a nice piece of scrap like zebrawood into a custom pencil, so you can have your hair support thingy AND a writing implement handy at the same time. :)

Graham Alexander: Nice project, My grand daughters watched it with me now I got to help them make one each but im going to use a drill keep the fingers out of the way... then ill just have to put up with them tying my beard up as they are with a pencil! Thanks April ......

Adventurous Aardvark: When I was 19, I got a job doing maintenance at a downtown apartment building. I had hand tools, but no wood working tools. The laundry room exhausted into the maintenance / storage room without a filter.  The only saw I had was a black and decker jigsaw from my dad.  I used it, with scrap materials from the store room to make a filter box.  The owner (a home builder) saw it, said he was impressed, and asked what I used to build it.  I proudly showed him my jigsaw.  To this day, I still think he was sincere, but now having owned two different companies in the trades, I realize how horrible it was.  There's a lot to be said for people being nice and making do with what you have.

Gene Jordan: I used nearly this same technique several months ago to create "Harry Potter Wands" out of wooden rods for a fundraiser at the local Science Center. They sold like witch fire. ;) Also, I've laughed several times at your videos while you search through your hair for your pencil. ;)

EmmaAppleBerry: I made a hair stick with cheap garden seccatuers aka the basic trimmer/cutter. Had a garden mask on p2 or n95 sort and used a branch off a gum tree (i believe) which i had trimmed off earlier in the year and had been using as a sort of rustic garden bed barrier betwden my salad greens and the lawn so noone mowed over it. It took an hour was outside and covered in sweat here in the aussie summer by the end of it but i wet the wood with tap water before starting just to rinse off any dirt etc and somewhat help softwn the bark a bit then once i finished all the bark whittling i gave it another rinse and smoothed it out and did the finer stuff. Still with blunt old lil cheapo hand cutters. I then made it pointed on one end and flat and nice on the other larger end and carved with the cutters a little inital and neatened up some of the knots or knobbly bita in the wood. I specifically chose a thicker longer and not straight end of a branch because my hair is super fine but there is A LOT of it follicle wise so its very dense and thick and then its also very long down to my hips so i need that extra bendy knobbly grip and i like the natural interesting look to that since i just use a bamboo knitting needle for everyday sorta stuff and the one i carved if im going out and about. Ive stained mine with black tea amd raw cacao powder mix and just bath temp hot water and done a few coats ill then do linseed oil over that and see how that goes i may try a light beeswax coating test on the ends just to test it out etc i various branches and types of wood from my yard so ill hopefully eventually get to try them all out. So really the only rool i needed to get the stick was a single blade the branches you can snap off or use bigger cutters or a flip hand saw but for hair stick size you really can just use your hand and break off the end of a branch even in the park youll find sticks around that would work. And its free. You could consider burning or carving the initials of the person your giving it too onto the top or the biggest end. Im no mwtal worker but when i was looking for basic hair sticks they were 30 dollars and wooden ones werent often much cheaper which is fine but knitting needles are better for everyday stuff and made to be durable and can be found anywhere so if you are doing a hair stick take some time to really put love into it and a sorta unique stylistic flair if you can. This is the first time ive done woodworking since highschool so it was really fun for me to make something i like for once and not just stick to what someone else wanted with no creative input

matt 364: Being a good woodwork is about knowing how to get around knowing how to use your twos in many different a ways and figure out ways to do it with out that tool!

jason van wilgen: you could try putting it in the end off a drill and then turn it on the belt sander or disc sander spinning it with the drill, great videos by the way

Azy: Before I watched, I thought perhaps your chucked it up in a drill and had at with sand paper :) So I guess that's yet another way :D Could also make awesome chopsticks for the shorter haired among us :P

Rand: I dont think a lathe would work a easy as that. nice job!

Sam Deeds Woodworking: Good video and good advice about resourcefulness! I have been a long time watcher and even saw you in Atlanta, I didn't actually say hi because you eating at the time and I didn't want to disturb you. But I just wanted to say thanks for the videos and keep up the good work!

You May Also Like
More Information

Leave Your Response