Diy Long Braid Satin Bonnet

  • Posted on 04 October, 2021
  • Long Hair
  • By Anonymous

Easy way to make this long braid satin bonnet.

.

.

HOW TO MAKE SHOULD FALL COWL KAFTAN

https://youtu.be/RM8IzR-jbW0

HOW TO MAKE A MAID OF HONOUR DRESS

https://youtu.be/FzZjHMdh9iA

HOW TO MAKE A RUFFLE CAPE

https://youtu.be/w-aOj_YUuVo

EASY FULL LENGTH FLARE KIMOMO

https://youtu.be/Jwh2FoCEGR8

2 IN 1 REVERSIBLE RUFFLE SLEEP CAP

https://youtu.be/cDIsr-5kzQw

.

.

CAMERA: Tecno Canon 16 pro

WattsApp: https://wa.link/6ttcvz

Instagram: https://instagram.com/patnomsew

Facebook: htpps://facebook.com/patnomsew

Email: patiencechinomso22@gmai

Hi beautiful people welcome you to another tutorial. My name is pablo, so um. Thank you so much guys to my subscribers. I appreciate you so much. I am very grateful and this is for a long breed and sometimes regular. Bonus can be a little bit comfortable when you are making this when you have to wait, but for a long way this is super super comfortable, like it allows you to still leave your braid at longer. It is without you know, discomforting you, so this is where the uh band you wear it from the head. Circumference and, of course here is where the braids actually flows out from okay, and this lens goes um beyond the brow hook at the back. Okay - and you can also make it um smaller if you wanted that, if it's not going to be for so much of a long of braids okay, so these are beautiful, colors i made - and so i am good for this tutorial. This is what i'm going to use, i'm also going to make use of this um stretchy fabric as well. You know i have this, i'm going because of this and, of course, this a half inch of elastic which is going to. I will use for this other side where the the braids can, you know, come out from okay, so here i usually like to walk with 40 by 30. Okay, now, the 30 inch is usually for the length of this of the the cap, and you can reduce it. Like i said, if you want it to be smaller, you can also um reduce it in length. It does, if you want it to be set above um the brow hook. Okay, you can do 25, that's 40 by 25, but here i'm making this long, one which is 40 by i'm 30 okay. So all i needed to do now was to fold this into two like this okay, i am folding up the the longer length, which is the 40. take note of that, not at um the 30, i'm folding that longer than it's 40 and so folding it now On this side, i now have about 20 and of course, on this side i have a headset okay. So what i'm going to do now? The first nail do not is on this unfold part here: let's let this the 30 length, but i'm going to get the midpoint of it, okay, which is 15. i'll. Take note of that. Okay, then i'll, come to this other side. Here i have 20. I also get the midpoint of it, which is um 10, because the fabric has been a little bit shorter. So here i have like 9 19 inches. I can just do 9.5. It'S okay, still i'll take note of the midpoints. Okay, then, coming to this other side, you know here is along the length. Okay, i'm working with so um for the lens. I usually like to say about 26 27, but let me walk with 27, so i'm just going to mark 27 here then, of course, i'm going to put um an extra allowance about two inches half inch is what i'm going to use to sew um the band To ease and, of course, one and a half inch, i will use to create the casing. Okay, for this lower part, okay, this lower part of the elastic so i'll add an extra two inch here. Okay and that's it so this is the length i'm working with so now. The next thing i'm going to do having a mind of this point, we've taken here at this place, where we took the midpoint of this 30 inches, i'm just going to come here now. It'S very nice. I hope you can see this. I'M just going to take this from this point and form a cork to this lens from here. I'M forming a curve here, you can do it with a couple like carefully. Do it with your freehand just from here i'll just form a call to this length here? Okay, so like so, can you see this as the first stage, then the next one is from this same point coming down to this place, where we have um when we market the missed point as well. This time around is going to be a straight line, so i'll just draw a straight line from here to this place. I will have to do that and that's it okay from here a straight line from the same point carve all the way. So the next thing is to cut this out, okay, so this is what we have i'm just going to open this up like this, it's quite wide so on this part now this is the comp area, and this part is the straight um part. This is where i'll be forming the casing for the elastic. So on this part, i'm just going to fold it here, half inch. First, then of course one inch i'll create my elastic casing. Okay, for this, i will do that. First then come to this curved area. Then i was i'm going to pleat around a stitch, a gather, stitch. Okay, if that works, for you better on the gather, stitch and pull it off to give you um the head circumference, now the rest of the rest, i'm working with is 23 inches just place. Your table around your hair on the fullest part of you take it around. You get your hair circumference, and that is what you're working. So here, the next surface, i'm working with is 23 inches. So i'm not going to form a gathers here or preferably a pleats. Okay, whichever one works for you, the most important thing is to form um the cork that is going to you know, accommodate the hair. That'S going to make the yeah to form the cup for the the head. Okay, so just for me, please, and of course by the time you do that, be sure to measure to be sure that um, it's going to be the head circumference. But of course, when you're forming it not directly at the tip, you need about, say, um half inch or three quarter inch on this side and of course, on the other end you have here which you are going to use at the end of the day. After four minutes, which you're going to use to you know finally close up. Okay, finally close it up. Okay, all the way to this number, so, whichever way works for you easier or easier for me, i'll, first of all form my elastic casing. That then, of course, form my cup then after that, of course, then can now fix um, so guys i'm done creating the casing for the elastic, and on this part also, i have um done the gathers on this part for the head circumference, and this is exactly The head, circumference, okay, excluding the half inch on both sides, both end for stitching it. So the next thing i'm going to do. Of course i have here this elastic. This is about eight inch, i'm just going to take my um sexy, pin like so okay and pass my elastic all through here. Okay, i'm taking notes so that it doesn't all go in totally. I like to hold it down at this end. Okay, then continue with that, as you can see so once i'm done i'll, just sew it up properly. Okay now still hold it down tipping okay, so i'm going to switch up totally afterwards. After then, then i'll distribute the gathers on this area properly. Then, when i'm done with that i'll come to this place, this one i have here the stretcher fabric, so i have been about five inch in length by um 24. Remember the hair circumference is 23, but here i cut out of course, um 20. Here i have 23 and they have actually so because it's stretchy okay, it doesn't have to necessarily be the exact. So i'm going to use this to solve and the allowance we left on both sides by the time we swapped all together, it's going to match, depending on the texture of what you're using this one is not so stretchy like that. Okay, so i'm just going to start placing it now here on the wrong side: okay - and here um - i have - this - is the wrong side of the band, so the right side is facing the wrong side. Okay, that is how i start attaching it from the tip. Okay, i'm going to sew through so i'll just quickly do that with demonstrating it with a pin. So you keep doing this till you get to the very end. Okay, so once you're done stitching it all through, then you will now flip it to the right side. Okay, so flipping it to the right side, i'll first of all fold, it half an inch like this fold. It half an inch then place it on the front like this. I hope you can see so then you now so this time around you're sewing on the right side. So you fold half an inch carefully and do that. Then you saw all the way. As you see me, demonstrating like this. Okay. Okay, so you see this is done already. Okay, then. The next thing now is to just fold it into two. This is the final stitch. Now forty three to two, then the half inch allowance we left on both sides. You use it and run it all. The way to this point, where you have the elastic case remember your elastic is at the edges. You also see it all the way we have to inch to the end, and that's it guys like that's it you're done, but of course, whichever one works for you, you might prefer to have sewn this together. First, before you start putting in your bang and your elastic okay, but i prefer to work with this open space as it is like this okay. So, whichever one works for you, so let's just go finish this up and of course you will see the end result of this beautiful bonnet, and here you have it guys. The long braid brunette is ready, so beautiful. I hope you enjoyed today's tutorial. If you do guys, please do not forget to share my videos, give me a thumbs up and, of course, subscribe to my channel till i see you on the next. Video have a wonderful day. Bye,

Samuel Iroegbulam: Nice work! Keep it up.

Ray Castro: Olá boa tarde, Por favor me informa as medidas usadas

You May Also Like
More Information

Leave Your Response