Hairline Goals 360 Lace Frontal Wig Messy Bob Vibes--Beahairs.Com

Only $159, ready to ship! Order ASAP

Wig link:https://www.beahairs.com/360-wigs/444-...

Website:https://www.beahairs.com/

Flash sale wigs:https://www.beahairs.com/63-hd-lace-wi...

IG page:https://www.instagram.com/beahairs.com...

Whatsapp:+86 15954895922

It'S kind of hilarious that your song played um in the card, and you sent me this message. It just shuffled - and i was like this - is unreal, like the timing. Hi guys welcome back to my channel, so i'm over the big o v. Yes, so today i'm going to be showing you guys, my frontal routine. I don't even know if that's like a thing, but you know that's what i'm calling it um. Yes, i've been wearing frontals for like five six years now and um. You know i'm always adapting and changing like the way. I install my front all the products i use and stuff, and this is like my most refined easiest best results. Yeah. Definitely the best result, so the hair that i'm going to be using in this tutorial video is from bee hairs. They sent me a 360 lace wig in 14 inches. All the description is going to be down below and i don't want to talk to you too much like let's just get into this video okay. So first, i'm just going to start off with my do key braids! Yes, i've just cornered my hair in like a nothing to me, just just something to get the job done, so i don't use the wig cap method. I just find it's a waste of time. I mean it doesn't make that much of a difference. So i just don't bother doing that, but yeah. So i start all my wigs um installations with putting wax in the very front hairline and hot combing it before it gets in my head. I feel this way. I can get it as flat as possible, so this wig came in a medium brown color. It'S actually really really great for my skin complexion. I feel like if you like, nc50, you can get away with it anything lighter than that. I would not recommend this lace. Color, i definitely recommend you get something lighter we're just gon na cut around the ears in like a c shape. This is to make sure that the wig can sit on your head properly. I'M gon na do the same thing on the other side. This is so so important. This will make sure that your frontal sits on your head very flat and it's comfortable. So i'm gon na be using the makeup revolution. Matte bronzer um. I use a powder to tip my legs, don't like using anything liquid or anything like that. I found that using a bronzer is the best thing for me. The perimeter of my head is darker than my face, so i like to use a color that is darker than me, and this just so happens to be my bronzer, but yeah guys definitely try using the powder to take your lace. It makes so much of a difference and it's not messy i'm going to go in again and i'm gon na hop home. I don't believe, there's anything called too much hot coming. I feel like the more you hook home the better. So now i'm gon na cut my lace, i'm using scissors in this tutorial, but usually i do use like a blade um, but i just wanted to make this like beginner friendly. So i'm just going in a zigzag motion, um just to make sure that you know it's not too straight and like you won't see like a line of demarcation. So we can already see how great that lace is blending without glue. So the glue that i am going to be using is ghost one glue um. This is old, faithful, like it hasn't, done me wrong, so i'm just gon na go in small dots, um in front of the lace front or, and i'm just gon na smear it with my plastic spatula guys you always wanna, spread upwards, not downwards, so i'm just Gon na spread a very thin layer, guys you wan na make sure that you're doing a thin layer. This is to make sure that it dries quickly and also so that you're not over using any product. If you are blow drying for more than let me say 15 seconds, then you put away too much glue, so i'm gon na go in again i'd like to do two layers. I don't like to do anything more than three because i feel like that's. Excessive and you'll just have a thick amount of glue, which is very unnecessary, then again, blending upwards um and then i'm gon na hit it with the blow dryer on cool uh. I don't use hot air um, i'm unsure if it makes a big difference, but i use cool air. So now i'm just gon na grab my lace and just make sure that it's sitting right on top of that lace, blue, not too far behind, because you don't want any excess glue in the front of the lace front. All so now i'm just pushing that in with the rat tail comb um guys. You really do not want to use your fingers. If you see me using my fingers, that is naughty. Do not do that but yeah. So i'm going to hit the tabs with some more glue. I feel like the tabs near your ears like it just needs more love like it just needs more help. Um, so yeah definitely gon na go back in again and i'm gon na roll up. The lace apply a thin layer of glue to anywhere where the glue wasn't able to reach, and i'm just gon na hit that with the cool air blow dryer again um. I did something very naughty: guys make sure that you're making your way in for your glue to go clear before you press it down. Um yeah. Don'T if it's white do not stick it down. I know i've just done that, but i think i was just getting a bit impatient but yeah, so i'm just gon na hit that with the cold air again and i'm gon na go in again with the glue like listen. If you have to go again with the glue as many times, because you just want to make sure that lace is secure, especially on the end parts um, it's very important that that is down, because, if that's not down the rest of your laces, just going to Stick up is look at how good that looks already like, even if i do say so, myself, like i'm gon na, do the same thing on the other side, so we're just gon na cut in a zigzag motion. Um use two layers of glue on cold air. I say this all the time, but the key to a good install is first of all good lace if your lace is gray or thick or whatever, like you've, already got 10 minus points. I feel like having really good lace and tin in the lace to your actual complexion like for me. I found that when i used a darker color on my clients and on myself, it just comes out way better and i don't get that halo too. Light lace. Frontal look make sure that you are pulling out any hairs that is like stuck in the glue um. This is just to make sure that your install is clean and, like you, don't have the hair lifting your lace front or anything like that so yeah, and also make sure that you are smearing the glue upwards like up into the direction of your hairline, not downwards, Because then, your lace is going to be too either too low or you're going to have excess lace on your forehead and that's just not cute so yeah, i'm going to press that in. I should really be using my reptile comb at the moment. Guys do not use your fingers, especially if you have glue on your fingers. Do not use your fingers to melt the lace in like do not do that. Don'T be shy to cut any excess lace that you feel like is out of place or does not match your hairline um. I also go in with like hairspray. If i need to um my preferred spray. Is the bed head spray? I have a whole review on that um i'll link that if you haven't watched that already i like to mix and match between the spray and the glue. So here i've rolled up the lace and i'm using the ghostbun glue. This is just to make sure that none of my lace is sticking up because i feel like that is not cute. You want to make sure that you'll get at least a good 99 of the lace down yeah. So this looks really really great. So i'm about to show you the places where needs more or a darker tint, i would say the corners of your hair, like the sides that needs to be a darker color section of your hair needs to be darker, just tin it darker than the rest of Your lips trust me. I know what i'm talking about, make sure that when you're hot combing, your hair, you are putting the hot comb really against your skin, i'm not the biggest fan of baby hairs. I just like really like baby hairs um for me. I don't use baby hairs as thick. I just use it to cover up, like maybe any sharp corners of the lace front or, as you can see here, i'm just sweeping the lace um, i'm measuring it out before i cut it and yeah i'm just using like a very minimal amount of baby hairs. This is just to cover up the sides um. I always find that the sides are the bit where, like you, really see the lace, but yes i'm just using that just to cover it up a little bit, i'm going to pull out a little bit of hair for my sideburns and that's pretty much it in Regards to the lace, frontal installation give me a feeling, so i really do like the texture of the hair. So this is the texture of the hair. Once you wash the hair um, it originally comes straight, but i am going to straighten it um, but before i do that, let me just show you the part and space, so you get about four inches um. It is a 360 lace front or i didn't do anything to that. I don't want to see it but yeah. So this is the hair all straightened up. Um, i didn't show me straightening my hair, as this is not a styling video um, but yes, i'm just using my remington black plate, straighteners um yeah. You can see how straight it gets considering. It was. You know a wavy body wave type texture, but it does come originally straight, um, okay, so this is the finished. Look i am thoroughly and do you know i always say that, but i'm really enjoying this wig like it's giving um. I just got my hair relaxed and pressed like it's so bad for me yeah. So let me just give you guys a bit on the hair specs of this hair. So is actually a 360 lace wig. However, i didn't do like anything to the back um as i just want to focus on the front, but it's a 360 lace wig, it's brazilian human hair. I have 14 inches here and it just goes. You know just that. I probably should not wall black but anyways yeah, so i just checked so this week is currently 179. They have like 50 off right now. I hope when i post this video it will be up but yeah. The wig is called ready to ship side parting messy bob vibes. So when i first installed this wig, you guys saw that it was, you know, wavy and stuff. So when i got this wig, the only thing that i did was i bleached the knots and i plucked it just an itsy bit, but it does come pretty pre-plucked like it has a good density on the front. Also that was really good. It made it much more easy to work with so yeah, so i washed the hair, so it originally came straight like this, but once i washed it, it went into more of like a body wave texture, as you guys saw um so yeah, that's kind of nice. You can get like two weeks in one, so once you straighten, it goes burn straight like this really really nice but yeah. I really hope that my frontal tips - and you know just me really like slowing it down and like talking you through the installation. I really hope that you know it helps someone yeah. I just hope that you know it makes a difference. I'M always changing and adapting like the things i do so like this is like my most recent. I guess frontal routine um yeah and look at how clean it came like if you look at a video of mine from probably like three years ago like that was not exist. But i feel like this came out really really nicely and yeah. I don't even talk to you too much, but yeah. This hair was from the hairs um. All the links and stuff is gon na be down below, as always um. If you guys have any questions, you know, let me know, let me know and yeah. I will see you in the next one, my you

M.M.C. T.: Found your videos on pinetrest and girl let me say that I'm hooked.

Dunbar Ro_: Nice

Cåt ll: It's this company run by Chinese? Because I hope so. I've ordered twice from company run by black women (not being racist) in less than 1 month. They've sold me ordinary lace as "HD" and brown lace as "transparent". They've been rude, dishonest and disrespectful and I've had PayPal and Etsy on my side because they could see it by themselves. I trust Chinese vendors way more.

Judith Fernandes: Não falo inglês. Meu bem

You May Also Like
More Information

Leave Your Response