(Very Detailed) 5X5 Closure Wig Tutorial | Closure Wig Tutorial For Beginners | Wiggins Hair

"But the Lord is faithful, who shall stablish you, and keep you from evil." 2 Thessalonians 3:3 (KJV)

Hey guys!! Welcome back to my channel!!! Today's upload is a very detailed video about how to make a closure Wig!! This hair is from Wiggins Hair and I will leave the links to the hair that I bought and the website below!! I hope you all enjoy this video as much as I enjoyed creating it!!! PLEASE DON'T FORGET TO LIKE, COMMENT, AND MOST IMPORTANTLY SUBSCRIBE!! BE BLESSED -LEXIS NICOLE

WIGGINS HAIR INFO

Original Website:

https://www.wigginshair.com

Hair that I Purchased:

https://www.wigginshair.com/body-weave...

Watch My Recent Videos

My First Fashion Nova Haul

https://youtu.be/FDzRgwF9G4I

:

The Perfect BLONDE ft. Wiggins Hair

https://youtu.be/7qGgP_ScMxg

MY OTHER VIDEOS:

My GO-TO Makeup Look

https://youtu.be/v4RvqWRWntM

Bele Virgin Hair Review

https://youtu.be/KRNKxnp4cIo

Bele Virgin Hair Initial Review

https://youtu.be/cNaycUzYCMk

!!!!!!!!!FOLLOW ME!!!!!!!!!

SNAPCHAT: pearlrosesss

INSTAGRAM & TWITTER: _pearlrosesss

**Disclaimer* I DO NOT OWN THE RIGHTS TO THIS MUSIC** ;)

https://soundcloud.com/freebmusic/dm-g...

Hey guys welcome back to my channel, so today I'm going to be showing you all how I make my wigs and first we're just gon na just start off with the mesh don't cap. I like this cap, so much because it has two holes in it and it's easier for you to see and so and easier for you to know where you put your needle. So you won't have any mix-up or problems so right now, I'm just clipping the closure to the cap using some duck pins, and this will help you stretch the cap and place it where you need to go on the week. So you won't have any issues, we're trying to figure out where to sew and how to put the closure on, and I've already put the hair up into a boss because get it up away. And now I'm just pinning the corners of the closure down to the cap, so we can stretch it and already have a seamless closure. Install okay using pins to pin your closure down just helps you with the sewing process, so your closure won't go anywhere and you want to make sure that you pull your closure above the dome cap. So when you put it off, it'll fit better on your head and you will have a simple and easy and pretty looking install okay, I'm using my curved needle and some nylon thread. This thread is the best you don't want to use cotton thread, I mean you can but to get a seamless and easy and simplest. I want to use nylon thread because it's very durable and it's very easy to use okay. So now I'm just putting it needle through and I'm pulling it through all the way I didn't loop it or anything. I literally just pull it through just so that the knot of the end can go to the top of the closure in the cap and what I'm doing now, I'm been doing my free loop with it. So I take the needle as you just saw, and I'm wrapping it three times around my needle and not pulling it tight. Okay, and now I'm going to do this again. Just so, I can secure the closure to the cap, so it won't move or go anywhere. Okay, you want to make sure that you're reinforcing your closure or your with any time. You start it off. Okay. So now I'm going to go into my three loop method, for I just look for a time that you just previously saw and these next three times I'm going to just pull it through the hole I'm going to here once and I pair I'm going to do It again just pull it through the hole, really easy, really simple, and because I have the nylon for any easier for me to work with, because the cotton thread just get stuck sometimes, and it makes knots and all that. So the nylon thread is really easy. To use - and it's really easy for me to pull through here - you see I'm doing doing it again before the third time and the time after this I'm going to leave with three times around my needle [ Applause ], two three and you're gon na pull. It'S just how I do my wigs is how I laid them down how I laid my closers down. This is how I laid my webs down anything that I'm sewing in regards to quick. This is what I do. I loop three times pulled it through and you want to make sure that you're pulling it tight so that the rest of your webs or your not says you may want to say, can stay tonight can stay tight and snug and I'm pulling it through through the Cap through the closure, pull it through the hole. Here'S the cap through the closure, wrap it around three times and pull it through. Okay, when you're sawing your closure, you don't especially it's just a five by five closure. Okay, so we don't want to keep sewing all the way around, because what we're gon na do is to make sure that that closure is tight, snug and slayed, okay, tight smug and slate. So I cut that string off and now I'm gon na repeat the same thing on the other side, but I'm going to pull my closure song. Okay, you can't pull your closure and have it's late and how you want it. If you can see you to just sew and for Mika team, that's all about the closure, it just doesn't works out. For me, the closure is always moving and it doesn't, you know, explain the right positions that I wanted to. So what I do is, I put it in my bowl to the other side with the new needle okay. So right here, I'm just doing my free loop method. Again, as you see, I already put my three loops and for the first needle and now I'm just doing it again, just to reinforce it to make sure that just snug and that is tight and that it's laid okay. So I literally just did three leave method on the right side of the closure, and now I'm going to just do the same thing to the back. I did cut the thread once I finish the right side, just so that I can start it over and start afresh with the back, and you want to do that just because you want to make sure that if you have a mistake, if you missed up on One side all you have to do is just cook that thread off and they start over. But if you continue to sell throughout the closure all the way around you might have to start all the way over. So I just cutted the thread and just started out with a new thread on the same needle I'm just to prevent that, and I'm doing it that same thing that I did on the sides of my closure tooth root method. You can pull it through, pull it through, pull it through the needle and then wrap it around three times and then pull it through just to reinforce and security, just to make sure that everything is snug and tight. You don't have to if you don't want to. If you want to you, can snap it or you can wrap it around either three times four times five times it's up to you. If you want to leave, read once or twice s up to you, it's alright, it's all at your discretion. So this is a five by five closure and using the duck pins and the hair pins to pin down the closure and solid according to that really helped a lot. As you can see, the parts look perfect, there's no lumps or no bumps within the closure, and that's how you want to make sure that your closure is lace laid and tight. Okay. So now for our bundles, I'm in our lips, I'm going to double wefted, which means I'm going to fold my tracks and so instead of doing single webs. Just because I have or abundance and I'm trying to fit all of them on this head as much as possible and because I'm trying to get through this fast and well not fast. But I'm going to take my time. But at the same time you want to make sure that this process is quick, easy and simple. Okay, so I'm just going to use my braid loop method, the exact same way that I did for my closure and also not push it down. I'M going to do that for my whips, okay, but one thing that's different from my closure on that words that I'm going to reinforce this three times. Well, maybe two I'm dependent on how I feel and then I'm also gon na go to read the lips. Okay, when you're sewing your web stone, you want to use a pin to hold the hair up, so you won't, so you won't have to sew, so you won't have to hold for well the needle and the thread at the same time. Just so you can. You know get through it easier, but you don't have to if you want, so if you wan na. So, however, you feel yourself, okay, but I'm going to reinforce through the weft twice and then we're going to do my favorite method. Where I just leave through the hole we feed the hole will beat the hole and then wrap around my needle three times four times. Five times up to my discretion and pull okay when you're looping you can make your spacing. However wide or hair is small. You want to you, don't have to space it small. You can space it as much as you want and I'll try to do. My maybe like half inch to an inch just because I want my lips to lay down flat, but you can most definitely do it in two inch and a half all up to you is you're weak, but we're not making mine and making a wig. So this time, when I make sure about doing flat and that the tracks are secure so later in the month so later down the road, you won't have to go back in and redo the tracks because they're slipping or they're falling apart. So when we get to the end of this row, what we're going to do is go back through the left. They can just so that we can make sure that this is being tight and reinforced. So, as you can see here, I'm just going through the weft. Just a lot can't prepare to hold the track they're holding. What I'm going to do is I'm going to put my needle through the weft turn it and then go up a row and then bringing a four seed with three loops around the needle. It'S just how I hold my webs. This is what works for me, and just so. I can make sure that I'll have any lumps or bumps in my cap and that the tracks are laying as flat as possible and it looked. It took me some time to get this working on the way that I wanted to, but I made sure that I did this. What does I had to just so? I could have my lips and my tracks flat. So, as you can see, I'm reinforcing this twice. Just so, I can know that this is linked as flat as possible in your mouth. I reinforce it to my liking, I'm just going to go through the hair, like I said before, you can reinforce it as much as you want to. If you want to go through the whip, now wrap it around three times down the whole row you most certainly can, but I'm just gon na do that towards the end and the beginning of my lips and my road just so. I know that those aren't going anywhere and then after I do that, I'm just going to simply so I'm just gon na simply repeat the steps it up and doing them my favorite method here you can see that I'm spacing them out a little bit more than I did the row beneath it just because I know that everything is secure and tight and snug [ Applause, ]. Okay, once I get to the end of this world, I'm just gon na reinforce it with some, not screwed it up and I'm gon na fold it and reinforce it. Just like I did on the other side once again, I'm going through my webs to reinforce this fold just so that I can make sure that it's going to be tight and snug and where it won't show when I'm wearing the wig on my head. Keeping is a really repetitive, so all I do is salt during web sweats the end and the beginning of the rows and then do my cantaloupe method all the way across the rows. Each time that I start on the row and as you can see, my folds on the ends are very snide, very tight and very tight and very smooth. You don't know this any lumps or bumps, as I sell for my rows, the cliffs. So if you like this myth that you can most definitely do it, this is how I solve my hair and my wigs and make them perfect for my liking, I'm! So if you do like what I'm doing please be sure to LIKE comment and subscribe to my channel for more videos on how I do my wigs and my whips come so you can stay tuned for more videos like this. Thank you all for watching. If you made it this far and half like, I said or please like comment and subscribe and yeah I'm just wan na, let you guys continue to watch the rest of this video on how I fold and so do my fridge with mythic spice. So if you get to the end of a track - and you don't have any more thread left, you just want to go ahead and cut it before you fold. You want to make sure you have enough thread to fold or, and if you don't like, I said before, just go ahead and cut that and just start a new needle, I'm like I'm doing right now. You don't want to fold and not be able to fo correctly and be able to fold neatly or have any type of lumps or bumps in your wig, because you don't have enough thread to do a fold and use anyway. So, like I said before, I just wan na cut that thread knotted and then just started in the thread with some new. You start a new needle or a new thread. So I just continue to fold and so as you've been seeing throughout the video and then once I go all the way up to the top I'm just going to continue to so, as you can see right here, I'm not going to sew all the way to The end anymore, I'm going to sew until I get to an even straight line as you can see that I'm doing my hands right here and then I'm gon na sew all the way across like that. Once I do that, I get to the top and then I'm going to single track on my webs we're not going to be double-checking anymore. We don't want our wigs to look too bulky towards the top of our hair towards the closure. You want everything to look seamless, perfect, pretty tight, snug and slayed. So once you get to the top of your wig, you want to singletrack it, and then you can continue to knot and do three loop method as I've been showing you all and once a little bit something that I do once I get towards the top of My wig is, I sewed a little bit to the closure just because I'm going to cut the inside of the cap where the closure is so just in case. You know, there's not enough cap there or I cut it in some of the cap goes away. The web can still beaks the web can still be so to the closure, so it'll still be it'll still be tight. Snug then slayed, and regardless of where we sew so you're gon na see me reinforce this, maybe a couple times just because we're sewing closer towards the top and closer towards the closure and we're finishing up the week a month. If I do reinforce it a couple times, it's only because I want to make sure that the tracks are going to stay tight and snug and that they won't move I'm, especially since the top of the closures. What you're going to see first before anything else. So you just want to make sure that you're laying your tracks tight and that you're laying them close together but single whip. It not double whip because we don't want to be bulky and then once I felt this off, everything is going to be good everything. That'S going to be great, and this, how I do my wish, I hope y'all enjoyed everything and and how I saw it. My hair and if you do like this, please use this medley, because this works for me very, very well and it's nylon Thor. It helps out a lot okay and make sure that you're, when you're finishing off your tracks or your needles, that you're tying the strings together twice or three times, and what you see me doing right here is that I'm just cutting out the rest of the week Underneath the closures so that we can reveal the beautiful bleached nuts that I've done to prepare and then we can see the closure and the parts and anything I said easy and simple. I do add an elastic band in my WIPs. I'M sorry in my wigs but imma show you all that in another video, but here I'll be showing you all how everything works and how the closure Lord sent out the party works. Not everything is flat and easing you wan na make sure that you're brushing your wig after it's all done just so, you can see how everything looks guys, but for this video, that's simply it. This is how I make my wigs, and I hope you all enjoyed it. If you do please like comment and subscribe, and I will talk to you later - bye

Tyonna Alexis Tv: Great tutorial Lex! Def motivated me to try it

Arthur Barber: Thank you for sharing this helpful video, I order the wonderful one from newigstyle..com two days ago

Randell Griffith: Thank you for sharing this awesome video, I buy the same one from newigstyle..com last month

witchsmummy: Why do you move the closure past your hair line and not line the Closure at the hair line before you sew?

witchsmummy: 9:11 I was told that you can sew through the band if you are using a mannequin head the same size as the circumference of your head it’s OK to sew through the band as the cap is already stretched to the same size as the mannequin head to fit your head?

You May Also Like
More Information

Leave Your Response