Crimson Red Lace Wig Bob Cut ❤️ With A Twist|Lace Melt Adhesive |Tinashe Hair

Akari, you hey babies and welcome back to our video for TVs that I'll be installing this lace with today, and today's hair is provided by tarnish a hair. Now, as you can see in the bottom left of this video, they sent me a 613 bob wig, and this is what the wig looked like fresh out of the box, and I did go ahead and watered I'm this week, crimson red. I use two bottles of that crimson red in some warm water, and I took it in there for about 20 minutes and I went ahead and took it out shampoo, the conditioner and let it air dry - and this was the color result that we got from that. That really really bright red, so off caramel, went ahead and braided her hair down, and I applied her stocking cap and I juiced that Ruby kisses foundation and level 11 using the darker shade and applied their foundation on the top of the cap and on the side. Where I want to be parting it and I'm going to take that same foundation and apply it on the inside and the top of her lace. Now most 6:13 come with a transparent lace in this lace is transparent. That'S why I has the white color, but once I go ahead and add that foundation in that matches her skin tone, it will blend perfectly so now that I have all the foundation on them. I'M going to take my beautiful hustler, late, Millie lace, mother heesu, and to begin to apply my layers of their glue and after each layer has turned clear. You can proceed to add the next layer and once everything is clear, you go ahead and begin to pull your legs down into the glue for today's installation. I did use four layers of glue and now that glue has turned clear, I'm gon na go ahead and pull that lace down into the glue and the best way to get this I'll melt it into place. You just want to have them, assist you and hold it down once you have it where it needs to be, and then you can go ahead and pull the other side down as well. Have them hold it and then begin to blow dryer on the heat setting and begin to melt that lace into that glue and also using your comb. So you know comb that lace into place as well, so now that it is glued into place, I'm gon na start going on start by cutting the extra lace from around the ears first and then I will go on with my scissors and slit on the lace That way, I can begin to raise all the remaining of the lace and I'm just gon na. Do this pretty much. You know one side at a time just go ahead and cut each air and then slit the lace. So I can begin to razor everything off now when it comes to transparent lace. When you are using a foundation, you want to use the foundation as closest to the skin color, because, as you can see, as I'm erasing off the extra lace like it stills look very blended and melted in it's very realistic. It looks like her real hair has been dyed red so just be. You know, mindful of the color that you use. If you went too dark, it would have been a little bit off so try to find that same person's. My perfect skin tone because you do get the best results when it matches other skin perfectly. As you can see here, it is super blended and it's going to be melted to perfection and I'm gon na continue to you know, cut off the extra place cut whatever you know, cut whatever off doesn't need to be there, but if it has to be there, Just go ahead and you know tack it down using more glue to the places that still lifting. But I am just amazed on how perfect, like this really blends with her skin, like it is to the team, and she was actually scared to try this red color. But it looks so so good with her complexion and it was just like the perfect color for her skin tone, and you know the finishing results of the whole style itself was just amazing. So now that I have everything you tacked down, what I'm gon na do. First before I actually I'm tired on the lace with the melt belt, I'm just gon na go ahead and part her hair to the side I'll get the part where I want it and then take the wax stick and just apply the wax. Stick all over the areas that I'm going to hot comb, because why that melt belt is on I'm going to hot comb. The hair on in so I'm just applying nail wax all across the top. So I can get the top nice silky and straight and I'm going in between the top layer there. So I can really really lay flat and then I'm going to pull the baby hair section out once again and then spread the hair line with that holding spray and tie it down with the melt, though, as I hop on the top and work on you know, The style in the meantime, so, as you can see, I went ahead and took that time to hot comb and press out the top of the wig, and I was nice in need - and you know sleek so now, I'm gon na go ahead and remove that melt. Bail and as you can see, it is very, very blended, very, very melted and for this style today, as you can see, I did like that broiler step. Bob type of look so right now, I'm just suctioning off only on the other side of the head that I'm not working on right now. I sectioned off the part that I will use to curl and right now, I'm just combing everything into place that I will use as the bob area, I'm just so in love with this color. This color looks so good guys, but now it's time to get into cutting the bob. I'M gon na first go in with my razor comb and just kind of raise it off the guideline. I'M actually gon na tell her that you know turn hosta, mostly guys, can see more clearly what I am doing right now. I'M just raising off the guideline to at least where I want the bob to you, know, stop at and I'm just gon na go around and just cut everything, except for on that section that I pull forward. I'M not going to touch any of that extra section. I'M just going to work on the back and the side where the regular bob look will be and everything else that's left alone on the other side will be curled. So I'm just going to continue to raise a comb and then I'm gon na go in with some really good, sharp scissors and begin to evenly cut across that same area. Where just raise it all to get that nice straight look, so I raise it it off to you know, make it easier and then I'm just gon na go in with my scissors and it's just all about having a good eye and just being patient and taking Your you know time to get you a nice clean, precise cut, and you know you just cut that straight up and you know if you feel like ice, I'm even you know go back in, but if you just really take your time and follow the same guideline, Where you started from, then your bob cut should come out nice and clean as the City here, but we're not done cutting as of yet because now I'm gon na go in and just begin to bunk. You know this week and I will have to go in and once again and you know clean up the cut as well, because you know once you bump it, you know some hairs might kind of get. You know out of whack, but I always cut first. Then I bump, and then I go back in and clean the cut out. If you know it's needed and I did go ahead and sew off so the wig down in the back off camera. So I know you probably got like what do you do to the back? I did go ahead and sew that down. While I was letting that milk then sit in a little bit more so yeah, but right now I'm using my Remington Flatiron. I believe it's the thick one. I don't know how many inches it is exactly, but it is the wide one. I love to use this type of flat onion when I'm curling balls, because you can use a smaller one, but the thicker ones. It really give you that nice soft bump, without you having to worry about over bumping your bob like too hard. So that's why I like to use the bigger flat iron as a plus. You know it catches more hair in one stroke. So, that's why I really like to use that as well so yeah, this flat iron is only about $ 35 and I got it from Walmart. Okay, guys, don't sleep on what my flying! It'S like! It'S all about the brand, and this is a really good brand. I love the infinity probes and I love the Remington flowers like they worked so good and they're only like they're under $ 40. He can't be bad, but I'm gon na continue to um. You know bump this Bob until I have all of the hair that I just cut for this section bumped, and then I will show you how I go back in and clean it up before. I proceed on with the next side, and this is what I meant by you will have to go back and you know clean the cut again. Cuz IV bump some hairs may be all out of whack, so I'm just gon na go back in with my scissors. Once again and just cut off those little hand getting flyaway pieces off at the bottom and you will still get that really really neat bob cut just make sure they have they have tilted. So you catch all the hairs and, as you can see, this bob is looking so so good already and it's not even complete. I love clean cut bobs like one thing that really irritates me, a bob that is not cut right, like you, can really tell, and it really annoys you as a hairstylist and you just be looking at it like girl, I'm gon na fix that for you, but Just take your time and with the patience you're cutting a techniques will get cleaner and sharper so yeah. Now that that's complete, I'm just gon na go ahead and quickly uh swoop the two baby hairs on this side, and I did that using holding spray. I really would have preferred mousse, but yeah I ran out and the hair stores are closed. So you know I got ta just improvise, so I'm just using some Tresemme holding spray and you know blow drying that when the heat setting and doing the same thing for the blue side burn. And then I will go ahead and focus on the curling technique. For the other side, so now I'm just gon na take my Marcel curling iron, everything that I did not cut on this side. I'M just gon na go ahead and curl it going backwards after each curl, I'm gon na spray a little holding spray and please occur and drop it. So I'm not cutting anything as of yet I'm just taking that Marcel iron and going piece by piece and just curling everything in a direction that I wanted to fall and I'm just repeating the same steps over and over, but the closer I get towards the top. I'M graphing the smaller sections just to make sure all of that, as you know, has been curled good. So I'm just gon na curl everything back and you know figures and that holding spray and then once everything is curled I will go in with the big wives. With comb and begin to comb and shape everything into place and pretty much with this style, you have to just keep calming and calming until you get that desired. Look and I will go in with the razor just a little bit and razors some down. But you know you just really have to play with the curve, because the curl is tight is fresh and I did want to lose her look. So that's why I kept coming and coming and coming and coming and then, when I got the hair to fall, how I wanted to fall. I just took some holding spray and you know spray this, so it can lay how I want it to lay, and you know the final thing for me, you know to do is just go ahead and conceal that part up using the same foundation color. I do have red spray, but I did not use any Westberry because the I just didn't feel like it was necessary with this look. So I'm just taking a little bit of oil, and you know you know, touch me what the hell applying it on her hair and I'm just gon na take the same foundation that I use underneath her lace and just clean a part of with it to make It more vibrant and you know more natural. Looking I got mentioned, I do have red spray, but I feel like it was necessary with this look. I just really wanted to lighten up their party and make it more visible, but that pretty much sums up this tutorial. I'M just gon na add a little oil paint at the top. It is so pretty the color is so bomb and I absolutely love to not shave hair. So, thank you guys for tuning in and don't forget to subscribe and tell me a little bit notification into seeing my videos