Protective Closure Quick Weave Bob With Beauty Supply Store Hair

Hey you guys and welcome back to my channel, i'm sorry, i've been gone so long again, but i'm back i'm about to do a protective closure. Quick weave on kobe y'all haven't seen her on her a bunch of times before and i'm just going in with some of that robbers diamond bun and i'm just i've already pre-braided her hair down and then i put a stocking cap on and spray. Some got to be spray on there and then i'm just going around all the areas where the closure won't be because she's going to wear a middle part, and i'm just applying this uh. This uh glue protection shield onto her hair. So the hair is already braided and everything i'm just applying this on top of the cap, so that the um glue does not penetrate to her hair. So i'm going to do that all the way around all around the back and everything y'all can see her braids under there and i left that middle part free. So we let her go under the dryer for about 15 minutes and it's completely hard. It should be crispy, nothing should be wet if it is put them back under there for a little bit longer and then i'm just cutting the excess cap off of there y'all this cap got cut off real crazy, but um i mean it's still. Gon na work out so yeah, i'm just cutting the excess cap off and i'm just gon na go and do that all the way around the head any of the cap that i don't need, i'm gon na remove it and if i have it back to i Mean like laid down too far with the got to be. I just peel it back a little bit and then cut it off, see that's what we missed the cap up, but that ain't gon na matter because that's in front of the hairline, so it ain't gon na matter, yeah we're using this beauty supply closure um! I'M just gon na uh go ahead and cut the little side, the extra fabric out the little side tabs off on both sides. So here's the closure right here. It'S the hd, transparent lace by laid in slate. I think that's what it's called and it's a four by five um closure and it's supposed to be hd, transparent lace. Really it's just like light brown lace, but it is pretty good quality for a beauty supply and then i'm just going in with some ruby kisses. Um concealer and i'm just gon na conceal all those areas uh where the closure will go and then a little bit around the edges. Um i'm just gon na make it look like a skin color. It doesn't have to be exactly i mean if you got exact color, that's fine, but if not i mean just get it like a skin color and then i'm going in with some ghost bun and i'm just gon na put three layers. I'M using the front of that the edge of the uh closure to measure how much glue i'm gon na need. So that's what you see me doing. I had it laying up there and i had it folded over. So i know how much glue to put and i'm just using a popsicle stick to um apply the glue you just want it to be like a thin thin layer, so it'll dry evenly and quickly, and so i'm just gon na do that application three times and Then um once i already cut the excess lace off of the cap, i like to do mine like that. I didn't show it, but i just went ahead and cut the excess lace off, and this is a pretty good closure for a beauty supply closure. It melts down really really well, as you can see right there, i'm just using my rat tail comb to help press it down. You can go in with the blow dryer to make sure that it's um, like really really late. If you want to, you can go in and put it some more, it's already pre-plugged, but you can go in and pluck it a little bit more. You know just to make it customized and then y'all see what i'm doing right here. I'M just pulling a little bit of that extra lace that didn't get glue on it. I put a little dot of the got to be, i mean not got to be ghostbud. On my uh hand, on the back of my hand, and i'm just using the end of the rat tail comb to like go right up under that lace, the part that didn't get glue on it and i'm just gon na pull it back a little bit and Then put the uh ghost bun on there with the end of the red tail comb. So that's what i'm doing right there! Okay, here you guys i'm just going in with the blow dryer and the little nozzle tip on it, and i'm just making sure that the hair um laid down the lace laid down on top of that glue. Make sure that everything is laying and then here i'm just going to use a black wrapping strip and i'm just going to tie um. I pulled out some of the hair hair, that's going to be the baby hair and then i'm just going to tie it all down with a black wrapping strip and you can use two or you can use a some kind of wrap bunny. So anything just that'll hold it down and um i'm using two of the black wrap. So, okay and then here i'm just gon na go in with a needle and thread and i'm just gon na sew this um closure down. It doesn't have to be so down perfectly because this is a quick weave. So if there's a sewing, you want it to be like really really super neat, but since this is a quick way, we just want it tack down really good so that it's not lifting or buckling or anything like that. So that's what i'm going to do! Take a needle and thread i'm just going to sew some quick little stitches around the edges of the um, the closure making sure to pull it tight and just making sure that it's flat, okay, so the hair that we're using i'm looking for the other bag. I'M using two bags of onions - i think it's ten inch might be eight inch. It'S some short hair that was on sale at the beauty supply, but the brand is called onix and it's just in this black and gold packaging like that, and it was no more than like ten dollars. So i got two bags that and i'm just going to use that to track her hair in and um i mean you can use any kind of hair that you can get at the beauty supply, especially for this type of style, because it's not going to last. Only but a few weeks, so you can go to the beauty, supply and get the cell hair. If you want to for this, so i use this hair color linux and then i'm just going to double track. It um. You do two tracks and i'm just apply glue to it, and i'm gon na lay these tracks down really quickly. I'M going in with some 30 second bunny glue. I actually like this one better than all the other glues because it dries super fast. So that's why i use a 30 second of bloody glue and that's what i'm about to use right here. So i'm just applying the first two tracks uh at the nape of the hair, and you just want to make sure that they are on really good. Then i'm going back in with another set of tracks just right directly above those two that i just laid, and here i don't know why. I'M just getting lazy, probably i'll, just put some glue on on the uh cap, because it's protect the cap anyway. So um. It'S not gon na hurt if you put glue actually on the cap and i'm just going from side to side laying the tracks down and then just cutting the hair off that i'm not using. And then i did that a couple more times where i just went in with the glue and just laid the track down, it's pretty simple: you can do it either way either way, and then i think i had started singling the tracks at this point. So, that's probably why i just put the glue on the uh on the cap, so i'm back to just lay it putting the glue on the track now and laying it down and i'm just still going from side to side and i'm just gon na continue. Adding the tracks in the hair, until i run out of space on the cap and we're just using two bags of this onyx hair, so you'll need to get like two bags of hair. If you want to do this style and i'm just laying another track down now and i'm just going side to side just want to continue going side to side and then and just until you run out of hair, so i put in all the tracks you want To put one directly up against the um, the closure and then she's going to wear a middle part, so i'm just parting out her middle part, i'm going in with this character, waxy that i hate so much. But it's now i can't say this sucker has lasted a very long time and it's almost gone now. So i'm just going in with the pressing comb now and i'm just going to lay her middle part down. So i'm getting a section out and behind the part, and then here i'm just going to go in with the press, comb and just lay everything down flat. If you have electric comb, you can use that also, but i'm using the stove comb today. I have both the electric and um, the marcel stove, one or whatever you call it and then i'm just combing it down with the rat tail comb, just making sure that my tracks are covered and then i'm just going to make sure that the part is directly In the middle, this is my homeboy glenn. He ain't got nothing else to do so. He came over and i just got the part where i wanted to be i'm spreading a little bit of got to be free spray to hold down some of the um. Like fly aways - and i just use my blow dryer to make sure that it was completely flat and you just want to make sure that those tracks are covered on the side, because we brought the tracks all the way out to the side. Like that, you can angle them up. If you want to to make sure that you, you have coverage and then i'm just going down the middle of the part, i'm just going to open up the part just a little bit, not a lot with the tweezers. I'M just going to tweeze out the part just a little bit, because i didn't bleach knots on this closure, because the lace was kind of already brown. So i just want to tweeze out the part just a little bit just to open it up. Just like that, and i'm just combing it down and y'all know kobe got ta act the food every time she in the camera - okay, so i'm just gon na cut the black wrap off here as y'all can see it's already. Looking good, it's already looking like something everything is coming together: real cute, like okay, so here i'm just going to take those hairs that i separated out earlier for the baby hair and i'm just going to cut them down to like half an inch. Probably, if you want them bigger than that, you can make them. You know bigger like an inch or something like that. I'M going to probably do about a half inch, i'm going to use the like the eyebrow razor and i'm just going to go in and just take out that cut the hair down for the baby hair, and you just want to make sure all the long pieces Are gone and then here i'm going in with some eco styler gel in a um edge brush and i'm just going to lay her um. Excuse me for the movement of the camera y'all, but i'm just going to lay her baby hairs down. You could definitely do a no baby, hair hair, look with this style, but um. Of course you know she wanted some baby hair. So i'm just gon na give her like three little baby hairs, one on each side and one in the middle kobe is crazy. Y'All, the video is sped up. I had a lot of people that was complaining about what she was doing on the video. The video is sped up like four times, so that's why, whatever you see her doing on her she's actually doing it, but it's not happening as fast in real life as it's happening on here, because the video is sped up so fast. So that's why it looks like she has like adhd or something like that so or some type of like disorder, where she can't be still. But it's because the video is sped up. But anyway, i'm just going in i'm gon na put one little um baby hair right there in the middle and then i'm gon na put one more. I'M gon na finish doing that one and then i'm gon na put one more on the side. Real simple, easy and quick, and then i'm just going to go in with a little bit of got to be um. Freeze spray. Look at jordan! He over there missed with that. I pulled the hair back, so we can do the baby hair. Now he is examining everything on the the hair, so i'm just going to put another black wrapping strip on while i work on the other part of the hair just to keep the edges tied down, so they can stay in place. While i work on uh the other part of the hair, then i just sprayed a little bit of pump it up on there and i'm just combing it down again just to make sure everything is in place and that the um edge the tracks. The ends of the tracks are not showing and then yeah, i'm just gon na. Do a quick little simple little ponytail cut on this uh on this bob. Nothing spectacular just do a little simple ponytail cut on it and that's it. That'S all we're gon na. Do you just pull the hair back in the ponytail, make sure that it's even cut do one cut? And then that's your bob. That'S your bob right there. You can go back through it and make sure that it's even all the way around or that no other hairs are sticking under the bottom, but pretty much you just do one cut and then i'm going in my babeless uh two inch flat irons and i'm just Going to just do a little slight bump, just a really slight bump on it, and that is it you so funny. Okay, once you're done uh flat ironing it you just um, i'm just gon na go through and take that black wrapping strip off of there. Just like that, i just cut it just like that. I just went in with a little bit more pump. It up go back over with the cone and make sure everything is smooth, and then i'm go back in with my ruby kisses and i'm just gon na um go and define her part a little bit more. I'M just using a shade, that's closest to her skin tone and y'all can see how much better that looks once i did that and then i'm just gon na go in and just blot a little bit in the little spaces in between the baby hair. Just to make sure everything is looking cohesive and then i'm just going to go in with a little bit of the i'm using the blue can of black spray. I don't suggest you use that when i would get high beams, but that's what i had right there and i just wanted to make the part crispy clean, went in with just a little bit more of the pump it up and a little bit of the um Oil sheen and then this is it y'all super cute super easy protective bob, don't forget to like comment and subscribe click that notification bell so you'll be notified. Whenever i upload a new video and don't forget to leave a heart in the comments, let me know that you support my channel girl, alright, see y'all later