Lace Frontal Install Using Ghost Bond | Rpgshow | Lace Glue Series

What'S up guys welcome back to my channel, so today we are doing yet another lace, application series video. Today we are going to be featuring a ghost bond for those who know about ghost bond. You know it's kind of like one of the harder adhesives to you. So today the hair that we are going to be featuring is this beautiful, beautiful wig that I received from our PG show. It doesn't really look up to par right now, because I haven't straightened it. I bleached the nuts and then I just let it air dry. So air dry it into a wavy texture. Now the wig that I have from our PG show is the straight brown ombre blonde human hair lace wig in the code for the wig is JH y 0, 0 1. The length that I have 20 inches, the full wig is 20 inches. The hair texture is just there straight silky texture, my lace, color is light, brown and really quick. I don't know if you guys will be able to see this, but their lace on this new lace that they have is super thin. Okay, the camera is zoomed in on it. I don't know if you can see it, but it has the frilly ends and usually when the lace has really ends, that's a really good sign that it's really thin, which means it's going to be very easily to blend. With your skin complexion, I got the 200 density wig and I got the size 2 cap, which means the circumference is 22 and a half inches to 23 inches. So if your head is within those measurements, then this wig should fit you just fine yeah and the hairline was pre plucked. So I haven't touched a hairline or anything like that. Now, before I get into this video, I do want to say by the time this is up. It'Ll be around the time for RPG RPG shows 12th anniversary, so they will have a lot of sales and discounts and everything going on so make sure you check their website and all the information in the description box below to check out what they got with a Prices look like and so on. Okay, so we're gon na run that back, because I'm not sure what happened. My camera just stopped randomly recording, but I was saying that the inside construction of the wig is the six inches in the middle and then the two inches on the side, two combs in the front and then one comb in the back. And then we have this built-in strap here adjustable strap and it's somewhat. If I can get it, I'm done it's somewhat like a bra strap. So it's really easy to buckle and unbuckle, because I have these big ol Dukey braids, though I'm gon na leave it on the last one, because I don't want it to be too tight. I know you guys are gon na see me looking down this because my mirror is down here and I'm just trying to make sure that everything is measuring right. Like I said, I have my big old Dukey braids in the back, so I know it's gon na be kind of tight as long as I can pull it to cover my sideburns, I'm straight, and I think I can sew and as you can see, this hair Line is definitely pre plugged in this color to come like this straight up, the box is bangin, I'm sorry have to say so. I'M gon na take these clips and just clip back as much hair as I can, and I don't know if I said this already, but today we're using ghost bond so y'all know this they're hardcore stuff and though sometimes y'all gon na try to set the house. So here we are, we going to get into it. I'Ve seen some tips on applying your wigs with those babo hold stuff like that, and the biggest tip is to use alcohol to kind of wipe off all the oils and stuff like that, when your forehead. So, first and foremost, I'm going to do that, I'm going to pull this back. This is a new baby hairbrush, so it doesn't have anything on it. Just going to use that to kind of rush, my little edges back son and we're gon na wipe all the oils and whatever may be on my face cuz. I did moisturize my face this morning and it's afternoon time right now, then I'm gon na push these little baby hairs back. While I can because my little baby here, it's me trying to be in the lace crew. So bad like don't know why but y'all when I first got this week, it was super silky and I don't know if this is true, but I've heard rumors, not rumors, but I've heard from different people that you know your hair is truly virgin hair. If you wash it and well, your straight hair is virgin hair. If you wash it and it dries lately, so this hair did dry it kind of wavy song. Is we bar or no all right? Stop I'm gon na flip this and just kind of pull it back to measure one last time. I thought it's gon na be tough, but I might can make it work. You know what I'm saying cuz you know when you have big bulky braids in the back. It kind of takes away from the room that you have inside the actual bleed cap also heard you're not supposed to touch the glue either. So I'm gon na use one of these Beauty. 360 jumbo cosmetic wedges like these and use that to kind of smear the glue, so I'm gon na start putting it on. If it will come out, it's not coming out. Y'All know I go middle first, okay and I'm gon na take this little sponge. You use it to smear and, of course I forgot to get my bowl drier. Wow y'all, I'm in my new space, the beauty room at the new crib. Oh, so everything is just all over the place. I'M gon na get my blow dryer and I'll be back. All right now, y'all know just for the disclaimer. I do like to read the directions sometimes and over here, there's literally no directions, so it's kind of like fend for yourselves type of stuff, but as quick as in so it took me to get go, get the blow dryer, it literally dried clear. I don't know if you can see that, but I'm gon na do another coat because I was fast as heck, so just dabbing it and I'm a user sponge just smear it and pull it back. So I figure, if you pull it back some, but not necessarily on your hairline pulling it back. Even if the edges start to come up, the whole lace won't come out type of thing, so going I'm going and with the blow dryer uncool. Okay, so they're done cool as you can see it kind of like clumped up a little bit over here, but I feel like we can fix that at the end. So I'm gon na flip the lace over and pull it down and the goal is to not leave any of the glue exposed so kind of try to pull all of the hair right over top. Maybe I shouldn't did a smaller section, but using my combs, I kind of juice, I guess dig or push the lace into that glue, and I know it's because I already had began with wiping all the extra off my forehead extra oils and stuff. It'S not smart to go in with my favorites to try and you know, push the lace down. So try not to use your fingers yeah, so it smell kind of tight. It almost feels, like you know, how will you have like a super tight ponytail? I don't know if that's just because it's connected to my skin, so I'm going to cut this lace extra lace off right here in this area, so I cut the extra lace off and where I see like a little extra glue, I'm literally just going down with The same swab I had with alcohol on it, and I just want you guys to see, even without the edge all the way glued down, now see how that lace is blending in with my skin, like okay, alright, so I feel like I can always go back And do the edges, but I kind of want to just focus on getting it adhered first. So yeah Harel, my mouth guess I'll, just go in on the next part, so kind of just trying to follow like my hairline type of thing, but not putting it on my hairline type of thing. But my edges, not my edge, is my little sideburns always being the way, but I don't like doing the ball head method. It doesn't really work out for me very well, so I never actually used that method. I know people recommend that method all the time you know so it doesn't get caught on your edges. But as long as you remove the glue correctly you'll be straight yeah, it just should be straight. You shouldn't have anything to worry about, but that ball cap method is just not for me, so Milo sideburns be having a little blue in there, but all I did was use some oil and it comes right outside okay. So if my blow dryer would sit still, I'm gon na pull this side down. Make sure my hair is out of the way, because, okay make sure my ears out and okay and I'm gon na pull this down to where I need it to be, which is right, jaw right chill. I'M gon na go in with the comb once again kind of push it in a little bit, hoping that this ear tab sticks to the poo. So far it seems like it's. Okay and my ear is untouched. Unbothered, that's the biggest goal. This is always the biggest goal to have your ear untouched and unbothered. So if I lift up this little hair right here, you see it's not touching my ear whatsoever and neither is the back of my hair. So I'm gon na just leave this lace right here and keep trying to remember not to touch with my fingers, because that is such a bad habit yeah. So I'm gon na leave that there and go on to the next side. You know just like once. I straighten this. This week's gon na be five okay cuz. It was five when I got it, I just need it to bleach their nuts folks. You can't hear Courtney Stevie if so, I'm so sorry she's in there watching when they see. If you haven't seen that movie, yet you need to watch it, it's a much must watch and it's a tearjerker. I was really afraid to put on this wig tonight, oh because I feel like such a bone, but like cuz, I feel like we're hair color. I feel like I always need to put on makeup. I mean which is not true, but just that's just in my it and I just ripped that lace a little bit because it was in my face and I couldn't see so pulling it down to where I need it to be. Okay, same thing, use my comb. Push it in see I've. Never I don't want to jinx it or anything, but I've never had it such an easy, install with ghost bond before, like I have problems, sometimes with co-spon and the heart, maybe we'll the hardcourt lose, because I guess the first step is the alcohol, because what the Alcohol, literally, it sticks with oils. Basically, I have the remem'er remover for both hold and some other stuff, and those removers are basically oils, so oil basically goes against what the blue stands for. So me, having extra oils on my face, makes it hard for the glue to actually stick so I'm gon na cut off this extra lace right here. I don't know what that is, but for these little edges that are kind of coming up a little bit, I'm literally just gon na take the little applicator or whatever this thing is called and just push out a little blob. If you come out I'll, do it and drag it across? Did y'all hear that beeping? I don't know what that was. But okay, then I'm gon na take the alcohol a a little piece with the alcohol in there and I'm just going to use that to wipe off the extra glue that I applied. And then I'm going to blow dry and cool okay. And I want to take the end of my comb and literally just push those edges down. I'M not pushing the hair down just the edges soon, I'm just gon na. Do this or every little part that I see sticking up for little pieces that I can't really fit the little applicator and I'm just taking my comb in there like that to apply the glue. So that's pretty much finito, I'm just taking a little swap wipe off the extra you know. Sometimes when you apply wigs for some reason, you'll face Kashi. I don't know what that means, but so that is done. I'M gon na tie a bandana over this and then I'm gon na. Let it sit for a little bit, I'm going to start straightening out the hair because I feel like this hair would just look bomb just completely straight cuz. It just looks so like this color he's banging like, and I know the colors banging, because even my dad said it was man and y'all know my hair, my dad he he know the hair color okay, weak side. Note though, my ultimate favorite heat protector, heat protectant spray is from style factor. Yes, they have heat, protectant spray. They have a lot of stuff actually for weeks, but this is my favorite. It'S so lightweight. It'S like a misty spray and then first of all it smells good and, secondly, it it gets the job done. Your hair be super silky. After there you go, it's called wig out you all right. So here's an image, so this side stayed like. I predicted this. Your tab came up, so let's fix this up. Alright. So clearly you can see it's a little little white stuff still there, but we're just gon na light it and see what happen my comb go. Push it in hold the comb right there cuz. I don't really want to touch it like that, so you can see the little white cast it's alright. I think I want to go for the middle part, so let me wipe the tail of my clone off, because there's a glue on here and we're gon na go dead in the middle okay and we're gon na use this hot comb to get this part together. Because that thing is wall into trying to pull everything away. Sorry, I'm not talking so much, I'm really trying to focus, because I get real nervous when it's time to use these kind of adhesive because they always do me dirty. They always do me dirty so i'ma get some got to be spray and I'ma spray it in the park. The reason why I said I want to use got some bee spray is because, if you just missed a little bit and kind of get takes care in the Flyway, so I feel like honestly, I don't really need any baby hairs, but I'm just literally gon na Take them to my baby, hairbrush and spray. Some got to be glued on there side note if you ever spray got to be glued like that, make sure you're being careful, because that stuff sticks and then like. If you get it like on glass, the glass will have like little specks on them, but the specks won't go anywhere so make sure you're spraying it in a clear space. Only cons to this hair - I do want to say, is that there's a lot of flyways other than that this hair is pretty silky and, like I said the color is banging now. The highlights are just in the front two sections here: I'm feeling it overall, the ghost bond the ghost bond is cool, but I just like is not for me the hold it is really well, but for some reason for me, my biggest problem with lace, glues is Getting it to stay on my sideburns and that maybe just because I have long sideburns, but I'm not really sure so as far as this area here I think it did amazing. But for my sideburns I don't know if you could see this right here, but there's like a little white cat she's, just not doing what I wanted to do but, like I said overall, it's enough for me. It'S starting to kind of get like cookie on this side, where I applied more glue, so I didn't want to apply any more glue to anything else. So it's kind of like once you get started. You can't go back. You can't change it because, even with rubber alcohol in there, it's just made a bigger mess. So if you do go in and use Ghost bond or anything hardcore like that, make sure if you need help they're already there waiting to help you out and just take your time. I did take my time with this install I mean I think so, but it's just I don't know I just mind my skin don't mess with this kind of glue. I don't know what it is, but I think the hair still looks bum, but I think the hair still looks really bomb and as far as the lace and everything else, the install looks very, very natural. Okay, the install looks very, very natural, but let me get up so I can show you guys what the hair looks like how long it is only, but I hope you guys enjoyed this video and I will see you in the next one mmm you