How To 360 Shot Weave| Pixie Cut 27 |Shot Weave Tutorial|Yarn And Thread Weaving|@Joyce Arts

Hi guys welcome back to my channel, and so today i'm going to make this short wave okay. So we start by patting this hair here at the back, you see, i have to make lines going up like this till here, and this is the last sample from behind the lines going up there. I'M just doing the normal line, you can add braid if the hair is too smooth or too soft. Let me see if the hair is too light. Yeah, you can add a little bit of braid. So that's how it looks. Then you have to use my clip to hold it like that, and so this part here. I have to part that way - and this is what i did they're coming all together meeting here and also the other side i'll do the same same lines. So i have to join them first, you can just check the process and understand how it goes. Okay, good! So, as you can see, i have this wave here. It'S a short view from darling. It'S called beehive, and so i have to to use my needle my card needle with the thread, but first i have to cut this end here. I have to pack them these corners here like this using my scissors. Okay, then i'll pick two strands of the weave. Like these ones here, and then there are two strands i have to put them together and then i'll have to start knitting them from there, and this is the part that you need to be very careful with, because um it needs a lot of attention for the Weave to lie down flat on your client's neck or on your neck. You have to to knit it in a proper way. So and as you can watch or as you can see, you will notice that i'm trying to carve it a bit. Okay, uh: i make the lines going up here behind because uh uh it helps for the weave to to be flat behind and not to be lifting up, even when you do some movements or what that's why i i like doing the lines going up. Okay, remember when you are knitting that with you have to you, have to put it to knit it closely, as i am doing for a better result, don't skip big gaps because um, if it's too loose, then it's another problem. Also, okay, uh! You can try this style here and then you will understand what i'm trying to say because uh it needs time here, but it's something good. Okay. So, as you can see here at the corner, i have to curve it yeah. Now, i'm carving just a little bit. You can, depending on your client's, neck okay, so i have to to knit it until there yeah so i'll have to cut the hanging strange by two and, as you can see, i'm just trying to knit here to be firm. That way, you can see it's lying on the neck good, so i'll have to use the same strand to knit again, but here i'm putting a little bit higher than i put the other one there. So i have to knit glossy to the first one. Okay, just let me say a quarter inch or a half an inch. You see there so i have to go and then here i have to carve it a bit, so i have to curve it until here so there and then i have to cut that way. The hanging strand and then i have cut my needle and remove it. So that was the second one you can see it's still lying on the neck, and so i have to use the two strands also again um, but here i have to put a little bit higher um. Let me say halfway the ear and then i have to knit the same same way closely to the to the other, to the other wave just closely for a better result, because when you're trimming and then it's a little bit scattered, then it brings uh. It can disappoint you, so it's better when you put closer to the other one okay, so so i'm still using the same same process as i started, and now here i have to cut it again until here halfway in the ear so so there and then i Have to make sure that it is firm and i have to cut the remaining hanging strand off with you - can see, as i'm comping still lying there on the neck good. Now the behind part looks good uh remember i did. I did the the beginning on three. Three three times i mean three strands so here in front. I have to do the one facing in front. I have to lay that this one here and i have to use my needle to knit it or to make it like down there. Okay, so that process continues it's good. When you watch it closely, you can understand and um you can also try to see where or what you can achieve. Okay, remember, as i always say, it's good to share ideas, so i have to add another strand. Remember these strands of weave that i'm knitting. There are two two two pieces two pieces at one: okay, so that's how i'm doing it until the other side. I will also do the same same thing. This is the right side, also the left side. I also do the same thing all right so here this is the left side, so i have to put as i did the first time. Okay, so don't give up, keep watching uh, so you can see now i have to continue now from here. You just lay it down like that, and you have to knit it carving to the other side about the same place. Remember the the both sides they have to be behind the ear like the way i started here so the other side. You also have you also have to finish from the same same place as this side. Okay, remember the short wave. We have to put it closely closely to the other one okay, and if the wave is thick you can use one strand, but for this one it's um it's a little bit um light, so i have to put two strands for a better result. Okay, as you can see, i'm still cutting the wave, so i have to carve it like that as i continue so there i have to cut it all right and so from here i have to put only here, um remember the first three parts of i show. I shown to you are the first um behind and then from front. You have to concentrate on those three parts: okay behind left and right; okay, good! So this one i'm still doing was the same, the the other one just knitting. Next to the to the last one, okay, so then, here i have to cut you see now so i'll start from here going like that to the other side, the same place, all right, so you can see here, that's how it's supposed to go. So this one has to be put here, and that is how i'm gon na do it, starting from here. In fact, doing with the doing this short trick is not hard. It'S just the way you you you like it and the more you do, the more you get more ideas. Okay, don't just do it once and then you give up because you did not manage you just give up like that. No, you have to keep on doing it until you get to perfection. Okay, remember! No one is perfect meat, i'm not perfect, but i'm trying okay. So this one i have set from here and the process is still the same. I'M going to knit it like that! Carving it closely to the other one until the other side, good foreign, so i'm gon na put this one like this. You don't have to put it straight, just a little bit, curvy carve it a little bit so that to achieve what you want, okay, so i have to start from here again doing the same same thing to the other side. Also, okay, sorry so guys here in front, i have start from here. I have to lay it down like that. Okay, my way will be slanting to to the right side so check how i'm gon na do it until the end, all right and so guys after this part, i have to start going round round okay, so it's round round round round. Until i finish to the center okay, so it's like that and now i'm going to do it around i'll, be rotating with the wave like that until i finish on the center, as you can see guys, i'm doing a wind up at this part. You have to be very careful not to harm your client with the needle, so you'll be very careful as you finish, okay and remember, you're, the one who's supposed to be rotating, not your client's head. Okay, so you have to rotate and rotate until you get that proper, finishing okay missing, i'm using this small finger to press it because i i want it to be firm, so this means i am done so easier, yeah mommy finger, or how do we call it? I don't know, but i hope you understand to press it there like that all right, you see, you can't see, you can't see the finishing there's no space good, so i have to cut like that and now you are welcome now to this session whereby streaming is Done so this is my client. You see how she looks so i have to trim that part. I have to trim behind and i will set swimming from behind. I will trim behind first and then i go sideways left right. Just the way i started by by knitting the wave okay, so i have varieties of trimmers or cutters. I don't know how you call them, but um. You can try it's good to have two three, because if this one is not working good, you can change and use another one okay, so i'm gon na cut with this one. This one is a little bit quicker, but you have to be very, very careful with it because it can mess up right. You have to be very, very careful as you use the scissors to cut or to trim the wave, especially short widths. You have to be very careful remember to watch out the client, the client's ears, because sometimes you may end up cutting glass ears, so you have to be very careful so here behind. I have to shape, according to my my likes, or how do i say according to the way i love it to be, or according to the client's demons, okay or requests so, but for a better result, you have to it's good when you trim it slowly. They are behind and then to get that shape. Okay, so it's good to be slow, because if you do it quick or fast, let me say faster, you can miss, so you need your time to do this. Have your time then you'd get what you want. I also have a reza, so i will show you also how to use a razor to to trim it. Okay, it's already fixed in a comp okay, so i will show you how to use it guys. For those who doesn't know right. Remember trimming is good when you shape according to client's head to your client's head. It comes out according to the way your head is um or your client's head is. So it's not hard, and this is the razer blade i was talking about. So you have to hold like this and go slowly slowly. In fact, it's it's nice because it it's inside the comp, so you just have to brush it like that and then it comes the way you want or it cuts the way you want. You see there's some changes in so you can see how it looks. Now it looks more beautiful and if you you have the um, how do you call it um this shaving machine or you can call it bubble machine? You can also use it because it also does good work. You can even try using that one, but you also have to be very careful with it uh it has. It has numbers, so you can start first with the number four. Then you go number three and then you can change the clip to number two and then, if you want to make the uh like a behind, if you want to make it to be more smooth, you can use number one but with care. Okay, so i have to use the same same scissors to cut this um or to check this wave here at the end. Remember, i'm only working from behind first working with this part here behind, so that i can come back to the front part for trimming and it's better always when you start with the behind okay, so i have to trim it and make it be on the right Level so i have to place my my scissors here and then i have to cut going down remember to be always careful with your clients, ears and neck, trying to move my clan's head. So i have to place my scissors also here and then i have to cut going down not trying and now is the front part. I have to start from the left side. First, i have to comb the hair and pat it like this, and then i can use a razor blade first and then it's your choice. You can choose what to use first, okay or you can even use the scissors from air to z. It also works good. All right, so trimming is like that. You