4 Vertical Hair Ventilation Pattern And Spacing | Detaild Beginner Tutorial

Hello guys welcome back to my channel. My name is Taylor simbi and if you enjoy you're welcome and please subscribe, and if you're already subscribed, but thank you so much for coming back. You are the best. So in today's video I'm going to show you four different vertical hair ventilation pattern and spacing so in my previous tutorial I showed four horizontal pattern is pressing. So if you haven't watched the tutorial yet, please do go and check it out, so that it will be easier to understand this one, these lights that are coming from the back to the front. They are called vertical lines and those tiny lines in this. They are called horizontal lines, those lines they are the one that makes a hole Yeah so right here, ventilate right here then we're going to skip one wall, which is two tiny, horizontal lines and then ventilate. Then skip one wall, which is two tiny horizontal lines until you finish the line that you want to do the vertical line that you want to do and then we're going to go to the next line and we're going to ventilate in between the hole that we Ventilated first and the wall that we ventilated, second we're going to ventilate in between that, and then we are going to finish uh, that line like in between the holes that we finished, so the first line will be longer than the second. Then. The third will be longer than the fourth going on with that pattern. Just like what I said in my previous tutorial, when I did the uh horizontal pattern thing it's like when you ventilate one or Skip One or even late one or Skip One More inhale pattern. Then you come to the next line and you ventilate in between uh the hole that you skipped in the previous line. So in a vertical pattern, those lines will be like the one that you ventilate first will be longer and the one that you ventlets are. Second will be shorter; the third will be longer. The fourth will be shorter. That way guys. So, if you haven't watched uh, the horizontal pattern do go and check it out, so that you can compare this. You can understand, like the lines that you see here, that the first one will be longer. The second one will be shorter, so just continue with this pattern: uh ventilation, one then skipping two tiny, horizontal lines, then ventilate. One then skip two going on like that guys. If you are a beginner to make it easier, you can start by uh ventilating horizontally to get your guide, so you can ventilate one more and Skip One move, and let one know going on like that, so that you can get a guide of uh wish line. Is going to be longer which line is going to be sure water? So just do a guide like that, then you can continue ventilating uh vertically, so, as you can see guys guys, this is uh the horizontal method. As you can see those lines, they are shorter than the other ones that pattern, so you can go on the longer line and just ventilate one one Skip One move and let one noise Skip One. No, until you finish then go on on the shorter line and ventilate one more Skip One off at least one no Skip One More. I hope you uh understand what I'm trying to explain here, guys just make sure that one line is longer. One line is shorter and for you to get that easier, you can uh. Do your guide by ventilating your horizontal line. First, like two lines: two horizontal lines. First then, you can continue to do your vertical lines, uh, because you already have a guide on top that which line is going to be longer which line is going to be shorter so that at the end of the day, you can achieve your pattern. So the first pattern that I started with right here - the first are spacing pattern. Is the first spacing pattern that I did in the previous video. The second is going to be the second year, so that in case you want to compare, it will be easier for. You to understand the snow that the order that I did in the previous is the same order that I'm going to do in this tutorial so right here, ventilate 110, horizontal line and then Skip One tiny, horizontal line. So in the previous pattern we ventilated one tiny, was on third line and we skipped two so right here, we're ventilating one and we are skipping one going on like that until we finish the line that we want to do so guys for this second method, we're Going to be skipping lines so after ventilating this one we're going to skip one line and then ventilate the following uh line. The third line so right here on the third line just go to the first word that you've, ventilated and then skip one whole and then on that line, make sure that it is in the same horizontal line with the one that you ventilated previously and continue doing. Your lines, so, at the end of the day, this pattern, you will have straight horizontal lines and you have straight vertical lines, and this one, like I said in my previous tutorial, is really good. When you want to do box braids, like a box, braided wig, you have very clean putting so yeah guys. This one is so simple and easy to understand. Ventilate 110 was onto a line then Skip One tiny, horizontal line. Then ventilate. One time I was on the line and Skip 110 was onto a line and make sure that they are in the same um horizontal pattern like they are straight these lines they are straight. There is no line that is shorter than the other one like we did previously like the first one is longer and the second one is shorter. It'S not like that. This one was just ventilating one line and skipping one line and uh make sure that your holes that you are ventilating they are in the same uh straight horizontal line and in the same straight vertical line. Guys like that there are no slanted lines. There are no nothing like that; they are just straight lines going vertically and going uh horizontally, so guys with this method. You can also start by doing your guide like ventilating one wheel, also into a line like uh that will guide you to know which line you're going to ventilate, which line you're going to skip so right here. I just went late right here. Then we're going to skip one wall and ventilate here and Skip one wall and wind like going on like that. This way you have your guide, like you already know, right here which lines your ventilating, which lines you are skipping. So after that, we're going to ventilate uh in front like Skip One tiny was on Tour line, then ventilate and Skip One turn was underline inventlet going on like that guys. So if I begin advice you do the horizontal line first, so that you get a guide of which lines your ventilate, which lines you skip guys. It will be easier for you uh to achieve your pattern at the end of the day, so make sure that you do your guideline first then uh. You can ventilate vertically going on like that, so guys. The difference between this method right here and the one that we did previously is the one that we did previously. We don't skip lines and this one with skip lines and the one that we did previously withinlet. One uh tiny was on tall line and then we skipped two tiny horizontal line and on this one we went late 110. It was onto a line and we Skip One tiny walls on two lines. So uh, that's the difference between the first and the second and the first one is really good when you want to do your closures and the second one is really good when you want to do your box, braided, frontals or box braided closures. So now on to the third uh pattern: uh, it's the same! Third, that I did in the previous, so right here, ventilate one tiny was on Tour line and Skip. One tiny was until line like we did in the previous uh second method, but the difference with this one and the second is in the second uh all the lines they were like going, horizontal and vertical. So in this one the line still be going like vertical and slanted so guys touch the second hole that you ventilated in your first line and then go straight in a slanted Manner. And then that's where you're going to uh start. Your second line so make sure that your first line the wall that you ventilated on your first line, if you are put your like your crochet in a slanted pattern like this, they will join in a slanted pattern like that guys. As you can see those lines, they are not straight like the pattern that we did uh in the previous, like the they are not holes horizontally straight. They are in a slanted line, they are going uh. They are foaming slanted lines guys, as you can see right there and then continue ventilating. So with this one uh there will be longer lines and there will be shorter lines, uh and forming a tiny slanted lines going on like that guys. I'Ve used this method to ventilate frontals before I'm going to link those to our tutorials in the description so guys right there. You can also start by doing uh one uh horizontal line, and it will give you guide like we did in the previous uh horizontal pattern. Uh, you can check out the tutorial guys. You can then start by doing one, and then it will give you a guide of which line is going to be to start first, which line is going to be a little bit lower than the other end, which lines you're going to ventilate, which lines you're going To skip uh so just continue to ventilate one time horizontal line Escape. One time was done to alignment one time it was on time line and Skip One tiny, horizontal line and forming those uh slanted Mana, so guys. I hope you get it that the first one um we ventilate all the vertical lines, the second one we Skip One vertical line, it's the third one. We Skip One vertical line. The last method that we're going to be doing will also skip one physical line always wish me to just fly away so now for the last pattern, we're going to ventilate 110 horizontal line and then we're going to skip two uh tiny, horizontal lines, which is like The first method that we did is just the same line that we're going to be doing right here, solve Inlet, one uh, tiny, horizontal and then skip two turnovers onto our lines and then we're going to do a a horizontal uh line right here. Uh ventlet one hold then skip two walls ventilate one more and skip two walls, this method guys the last one. You have to do this horizontal pattern so that it will give you a guide. You have to do this to get a guide and the vegetable pattern will be easier to achieve so guys if you haven't watched, the horizontal method in the previous tutorial do go and check it out, so that it will be easier for you to uh. Do it on when you are doing like the physical pattern so right here guys after doing the guide, I know the lines that I'm ventilating and the lines that I'm skipping and all the lines that I'm ventilating I'm ventilating one tiny horizontal line and skip two tiny Horizontal lines, ventlet 110, was onto a line and skip two tiny horizontal lines. So the difference between this one and uh, the one that we did the third one, is that this one we are ventilating uh, 110 Euros on two lines and skipping two tinos onto our lines and the one that we did previously. We ventilated one time it was on Tour line and we skipped one tiny hose onto a line and the difference between this one, also with the first one that we did is that the first one we were ventilating one time he was on Tour line and skipped Two that, like we are doing here, we're ventilating one and skip two and this one. We are skipping lines, the first one. We don't skip lines. So that's the difference so right here, I'm just continuing to ventilate one turn. It was onto a line and skipping two tenos onto a line. This method is the first best, but when you're doing it to make your closures in front or you don't use it alone, you mix it with the first or the second or the third. So guys to. Let me know what you think about this method: that you're also going to try it and make sure that you check out the horizontal pattern so that you can compare it to this vertical pattern. So thank you so much for watching guys. If you are new, don't forget to subscribe if you already subscribed, but you are the best goodbye