Start To Finish | 4X4 Hd 12In Bob Wig Install | Plucking And Bleaching | Ula Hair

There'S something about you, try to ignore. Hey you guys! Welcome back to my channel, i am zarya and i am back with another video. This video is sponsored by eula, hair um. This is their 12 inch, 4x4 glueless straight bob wig and in the bag or whatever it came with some instructions. A wig cap like a coupon and everything like that, a comb and some lashes and i'm definitely glad they sent me a comb because i'm gon na need that so yeah. The quality of the wig was great. I loved how full it was. The lace was given hdd like it said in the product information, so yeah the quality was 10 out of 10.. It also came with extra adjustable straps in the inside, although i didn't use it, it's very convenient now, i'm about to start my plucking and bleaching process. Normally, i would bleach first, but i wasn't trying to do all of that, and i just felt like this was much faster, especially since it was a 4x4 instead of a full funnel so yeah i'm going to plug first, i'm spraying the got to be on the Lace to push it back and get it out of my way or whatever. Next i'm pulling the edges out so that i can pluck the hair from behind the edge line where it's already thinner and if y'all want a full, in-depth video about the little plugging process. I would definitely do one of those, but since this is not the video for then it's simply just a tutorial. An install tutorial. I'M not gon na go into full detail about plugin, but yeah. As you can see, you i'm just pulling the hair in a fast motion and i'm pulling it towards myself so that i can just pluck the hair or whatever i don't know how to explain it. But you can tell i do spray my hair a little bit because i feel like i plug better when the hair is like damp, some people plug better when it's dry, it's up to you, but if you pluck, when the hair is wet, please be careful and Please take your time because the hair comes out a lot easier and faster when it's wet and you don't want to overpluck your wig. So definitely take your time doing this part. I also went ahead and plucked my middle part, a little off camera but, like i said, if y'all want a full uh video about plucking, let me know - and i will definitely do one of those, but this is how the plugging part came out now. I am just combing it back so that i can prepare to bleach my knots so yeah just getting the hair out the way slicking it back and yeah after that, this part is optional. I do like the spray that got to be on the lace before bleaching. It because i just feel like it gives that extra barrier so that the bleach doesn't seep underneath and bleach the hair, but it's very optional. You don't have to do this, then i just blow dry, it till it's dry on the cool setting and then i just go in with the bleach to bleach my lace. I use the bw2 bleaching powder, the 30 developer and i don't have a mixing bowl. I don't know why i don't have a mixing bowl y'all, but i don't have a mixing bowl, so i just use this bowl every time. I do something dealing with chemicals in here. I just use this bowl and a plastic knife. I prefer to use a knife rather than a spoon or a fork. I just feel like it works better, but that's all you do and the consistency needs to be like toothpaste form. It doesn't need to be runny or too thick or nothing like that. But toothpaste form is perfect, so yeah, then i'm just gon na put it on there and don't be too rough with this process. Y'All just take your time cover the whole lace. You don't have to press down or anything like that and yeah. That'S pretty much it just do that and you'll be fine, okay y'all! So since we're in the washing process, it's pretty self-explanatory um. I use the shimmer and shine shampoo and conditioner to get rid of the brassiness of the lace after bleaching it. But while we have time, let me explain to y'all about this whole wig install process, so this was my first time installing the 4x4 on myself and period overall, never installed a 4x4 ever so i was already skeptical on that and then being that it was a Short bob wig and it was a 4x4. I was so scared, like i'm gon. Na be honest. I did not like the outcome of how the wig looked on myself. Now, it's not a ugly wig, because the quality is great and all, but me personally on myself. No, i definitely think it would look better on someone else, though, but it was like longer in the front and shorter in the back a little bit. So i didn't really like it. I'M just going to be honest, but i tried my very best to fix it up to my liking, but i only kept this weekend like one day and took it out the next as fast as i could cause. I really didn't like it, but hey you got ta, do what you got. Ta do sometimes, and i try my best to make it work so yeah. I was just being honest with you guys, but if you like it, please write. Please try it. I definitely think you'll look cute on somebody else, just saying back to the video okay. So, let's get into it right now i am wiping my forehead with rubbing alcohol. You already know got ta, get the oils and stuff off your forehead, so you can lay that wig, even though it's not a funnel. I just wipe my whole head because why not i'm brushing my edges back with the got to be edge, control gel or whatever, and i didn't have to do a braid down because i literally just took off a wig. So i have to do that part. But yeah i'm brushing my edges back, so i don't lose them even though there's pretty much still already rushed back. I don't play about my edges and they already be coming out. So i know um, then i'm just blow-drying that until they dry uncool and then okay y'all so right here, i'm spraying the lace in. I think this is medium brown. Normally, i would use something lighter than this, but i didn't realize that i had ran out of what i normally use until it was too late and the hair stores was closed. So i had to work with what i had, but this spray is a bit darker than my skin tone, but i just had to work with it. But when i put this wig on right here, y'all, i literally knew i wasn't gon na like this wig, but i just i tried so hard to like the wig y'all. That'S alright! I did not like it at all, but anyways next, i'm spraying the lace with the tent. Next, i'm cutting the little side pieces off now. I'Ve seen them doing this in a little video. So, that's why i did it um, like i said i never installed a 4x4, so this was new to me and plus it was very difficult trying to cut that, because the hair kept getting in my way, but yeah just cut them a little y'all know what I'M talking about cut them little square pieces off right here, i'm positioning the wig to where i want it to be on my forehead. Now i don't normally do a glue this wig, but today i just wanted to do a glue this week. I don't know why, but i should have pushed my cap back a little more so that it wouldn't be so close, because you can still see it a little underneath, but i'm spraying my even spray on the lace to lay it down and then i'm just going To tie it up with the um elastic band, okay, so right here after i tied up my little elastic band, i had to pull up the lace a little bit because it was going to dry like that and when that mug dropped it hurt so bad. So i had to pull it back and then i blow-dried it and cool setting until it dried fully after i pulled off the elastic band. I realized i didn't like the position of the wig. The hair was too far back on the cap and it was too much lace on my forehead and i personally didn't like that. I don't think that's cute, so i took the alcohol and i started to wipe it so that i can pull the lace back. A little off my forehead, but of course the alcohol ended up taking the whole wig off, so i just went ahead and cut the lace and took the wig off and then reinstalled it that way, because i feel like it would be much easier to reinstall it Without so much lace to do it so just have to start over basically, okay, so right here, i'm basically parting it of how i'm gon na wear it so that i can see how far back i want the part and basically see where my edge is going To be and stuff like that, so after i did all of that, that's when i laid the lace back down and yeah, since it was basically like a reinstall. I just went ahead and pulled my edges out, pulled it down to how far i wanted it and then went ahead and sprayed the even spray and tied it down to let it dry see i'm going to show y'all the whole process i didn't messed up. I didn't took this wig off started over reinstalled and started in all y'all, i'm going to show you how the whole process, i'm not sure nothing about this install or wig, i'm going to tell y'all how it is and i'm going to show you how to struggles, Because yeah, it's the first for everything and like don't give up like just keep going you'll get it um and i also messed up the edges when cutting them, because the mugs was uneven, not gon na lie because for some reason i'm discombobulated on my left side, Like i can't i can't cut from the left side, but we figured something out. It came out all right, okay, so after taking that bad boy off for the second time i looked at it, i still wasn't satisfied it. Just the whole thing wasn't given it just wasn't given, but we still gon na make it work. We still gon na make it work, because that's what we do over here, we don't give up. We still got ta, make it work. So guess what i did. I tried my best and i parted that mug down the middle and i figured something out and i made it work and that's what sometimes that's what you got to do just make it work, even if you don't like it make it work. Okay. So now i'm going in with my wet stick about to make this wig flat as possible. Uh, i'm just going all around the wig, the edges, the top of the wig, the back top of the wig, the other side we just going all around just waxing them up down. Okay. So now i'm going in with my hot comb and i like to start at the edges part before i start on like the top and stuff, because i like that little humpy part, i don't know if y'all know what i'm talking about, but that little part right There, in the middle for a middle part - i don't know but the girls that get it, get it the girls that don't don't anyways yeah, i'm just making it as flat as possible. Y'All see okay y'all. So now i'm going in with my edges, i'm about to lay them bad boys um. I pretty much did this off camera because i kind of struggle with the uh, the edges and laying them, because it didn't give me much room to even have edges like. I don't like four by fours, i'm not even gon na lie. I don't like four by fours. Give me the whole frontal. I need something to work with i'm i don't like this, but yeah, i'm just swooping images. The best way that i can and y'all don't see - and please excuse my faces and, like this whole video, because my concentration face - is ugly as heck okay. Now this is when stuff finally started to come together. Um, i didn't want to wear a stripe because i didn't like the size of how it look. So i decided to curl it so right here, i'm just splitting it into two sections spraying it with the heat protectant and then we're just gon na curl that mug and yeah that pretty much wraps up this video. Like i said, this was my first time installing them for about four. Also, i pretty much rushed trying to curl this wig because i was just over it and i knew i was gon na. Take it out the next day, so yeah um, it's not the best. Look but yeah like i said, though me personally. I did not like how the hair looked on myself, but i think it'll look so pretty on someone else. It made me look a bit older and i don't really like that. But yeah the quality of the hair was amazing and everything else was amazing um. But if you like to shop at ula hair, the link will be in the description box and also you can use my discount code, which will be on the screen and also in the description box. So yeah. Please go check that out and i hope you like this video thank you for watching my video and please like comment and subscribe and i'll see you guys in my next video bye. It'S guys