How To Slay A Quick Weave Wig With A Frontal Using A Hot Glue Gun ( Beginner Friendly )

Okay, so this is the wig block for this um. You see that I did cover it with clear tape, because I am going to use the of course a hot glue gun, and I wanted to make sure that it does not get all on my wig block. So these are some art mine products. The glue gun was all of three dollars and then I think the actual glue was like another three dollars: okay, so you're, just gon na pin the hair up - and this is I mean this - is pretty much standard for what um. What I did in my last one, which is the how to make a live video, so this is the only part that you're gon na have to sell, which is we're gon na sew the front tool down to the cap. Now this wig block is a bit bigger than my actual head, so this week I when it was all said and done, was a little bit on the loose side, and the only reason why it was really on the loose side for me is because my braids Were just done poorly, like cuz, I did them, so I don't have a fresh, fresh beehive, so it's more space than usual. However, I always say: go a little bit bigger than too small cut. To small gives you a headache and then you end up. You know putting attitude it wasn't that much bigger though so I do have another one, which is a 23 inch wig block, which is pretty standard because 21, 20 and 22 are pretty small, um. Okay, so yeah just someone here same thing again in the last video that I did, which is how to make a wig. I go a more depth about the sewing that I'm doing the methods that I'm using, but this is the only time you grab this up with this entire thing you wasted time. You would find what you have remember when you put this on like when you put your frontal on uh in my previous video that I just spoke about. I did pull it trim it like a whole lot forward and for this, because this wig block is made for us like actual head size. This is just not like a general size, we're using um. You can pretty much put it on the hairline of the actual wig block and it's gon na come out the exact size that you want it to be. You don't have to pull it forward or anything like that. I cheated mine's a little bit more forward just because I didn't exactly know how this was going to fit me. So just you know, trial and error purposes um. I just I mean like literally like a couple of scoops, and that was it, but it was fine. Um, when all was said and done, it was fine. I will need an adjustable strap just to be on the safe side, even though I do gots to be glued the front down. A lot of people asked about this lace here on the side and for me personally, I cut that once I actually apply it and put it on, you can cut the sides which I've shown in the other video where I'm sewing it. You can cut that off. If you like, but for this method, I didn't feel it was necessary because I'm just gon na glue right over it, so whether I cut it off or it just does nothing make a difference. I promise it's just so not gon na make a difference. Okay, so we're using three bundles of body wave and the reason why I went with this because I did buy the wave last time and I think it's going to be a little bit easier for you guys to understand and see the end result. So you're gon na pin one side and you're going to measure it once you measure it then you're gon na go ahead and you're gon na cut. It now take your hot glue gun, I'm using a different one, not the one I showed in the package, but this is the one I still had and I've been using so you're gon na put it and you're gon na put it down. If you take this glue and put it all the way across the front of this, what's going to end up happening, is the glue is going to dry and then nothing is going to stick, so you have to do it section by section. So, as you can see all this little extra glue, you see you it peels right off, so you're fine, so take it smooth it FYI. If you are young or you are not the smartest with using hot glue, be careful because it does get very hot. I'M not in to burn you in my opinion, but it can so you see where you pinned it now after everything else is glue. You just go ahead and glue that last little piece. I left a bit of a space right there because it's really not going to matter, but I didn't want trucks too close to where my ear tabs are going to be so you just because you're going to cut the rest of the cap off anyway. So again, you're gon na go you're gon na cut the ends off then you're gon na keep that pin you're gon na put it in the back here, I'm making them a little more on the close side, because I just want to make sure the fold that I put in this cap is going to actually stay and then there you go right up in there. You get a little bit of glue in the hair. Don'T worry about it! Cuz it peels right out! Then here glue that piece and there you go this wig literally took me 30 minutes. I think it actually took me 25 minutes. I don't even think of 30, but yeah make sure also when you're doing this, because this doesn't require any type of um for you to so. Besides, the frontal make sure that you do not glue your the corners of where your tracks are too close to your frontal, because what you're going to end up happening is you're, going to end up being like creating this barrier where stick all the way around. So keep a little bit of distance between the actual you can do it in the back. You can make them close in the back, but in the front don't do that. So you see that piece I just measured. I put it aside because I'm going to use it at the top for shorter pieces, so that was um bundle one. So now we run bundle two and, as you can see, this took me probably like 10 minutes so again we're gon na go here. So always pin through, like the last little section of the frontal, don't leave too much space but not make sure it's as close as possible. So here, as you can see, there's a big space in between these two and I'm doing this, because I'm only using three bundles of this hair and I want to make sure that all the hair fits and it's even so. But that's why I left that space. But you won't be able to see and print just remember it's in the back of your head at the very bottom. Unless you are upside down and as your business, if you OH um, nobody should know that you have any type of space back there and it's not very noticeable. But I do like to kind of put them kind of close and then create a space put them. Car clothes and then create a space when I'm doing about three only because what it does is it evenly distributes the hair, without it being very, very sparse at the top and super thick in the back. So here I'm doing the same thing just pulling it boom boom boom, hold it press it and boom. There you go, I cut a little piece off because it was a little bit longer and then I just took this piece and I cut it and it's I don't know what the end of this was talking about with the left, and I don't like that. So it got that again, we're gon na do the same thing. So you're gon na go ahead and pin it stick. It then measure it once you measure it cut it then, once you cut it go ahead and take your hot glue gun and then measure it boom. There you go hold, it then go grab, and this is great for when you do not have time to sew all night. You just don't have the time or the strength, and you really need to get a wig done for either. You may be a client, a family member, it's an occasion you're going to end up having to change the wig for whatever reason or the one you had wasn't working out. This is great. You just need a spare hour and um slope just a little bit off. Um, these are art roles. Um hot glue guns are great. The only thing that I don't like about these is opposed to my other one, which I did buy. Remember when you guys buy these hot glue guns, make sure you guys buy the right size because there's a whole bunch, and especially I got mine from Michaels and at Michaels they have so many different sizes. I bought the wrong size for the gun I brought, which actually doesn't. It has like a clip in the back, so it keeps pressing the stick until it's completely done. These have you have to put the next one in when it gets to a certain point and start pushing it which actually helps push the glue out for the one? In the front, so that's the only thing. So that's why you probably notice that I'm kind of pushing my body towards the back of the gun, because I'm trying to make it oh, but for $ 3 you can't really beat that um, so damn boom cut. Make sure and then imma go ahead and steal this side up, and I notice that why, while I was doing this, I was watching loving hip-hop, so our minds got a little crooked. So, just to you know, even I don't know I just made it a little higher on one side and cut it and then they're gon na meet on this side. So bones just took it hold, it just remember, do not put it through the hole wept because you're gon na end up having a pill it off and then you're gon na be a little mad at yourself, which sucks. So I don't. I think I started this wig at like 955 and, as you can see on the services 1032, so I'm making great time. I was able to finish this within an episode which is impossible. Usually when I'm sewing - and you don't have to do this all the time. But as of recently, because just time restraints - and I just don't have time to you know, show a wig all the time I'll do it every now and then, but for the most part this has been my source and it works. The only thing is when you wash your wigs, make sure you wash them like two inches from the root down: try not to get water on this, because water pretty much will help you pull off. I'Ve watched for wigs and had every intention of redoing them and then sometimes I have to really pull to get it off. But if you just are one of those people who you weren't, curly, hair or something like that, just make sure to not try to get as much water product, fine water, not so much on um on the top. And you should be fine, and this is the best you know we quickly. I don't like to use naty's blue with this, because it does not stick as well. It takes forever to dry. This is a very quick method. It gets straight to the point and a great thing about it is it does not ruin your hair, but it Loki Loki actually sells your weft No waiting for me got a fortune, and this was the piece that I actually I showed you guys earlier that I Didn'T use it because it was too short. Well, no pieces were not used for this particular wig, so go ahead and stick that down measure it cut that off run the glue through real quick run, the backside real, quick and boom, and we were done in less than a twenty five about twenty five minutes About 20-25 minutes, so then, oh I got to do the the last little tip of it and boom any extra glue that you see just pull it and it'll come off. So here I'm just gon na take everything out of it um and boom. There you go! You got your nice body, wave everybody's food and then what I do to pretty much take this off. Is I peel like remember to take these remember we put these in the beginning. These pins remember to take them out and don't glue over them, because they're gon na be bad. So I'll, pull your lace front wheel back and then pull it off and boom kill cut the inside out. So a lot of people are confused. You'Re, just cutting the extra piece, that's up under your frontal, because you want to put a nude cap on so you don't want it to look black on the scalp, so you just cut that little piece out and then BAM. You'Ve got a brand new wig with not too much effort, so, as you can see, put it back on pardonez gray. Baby here is great. This was pre plucked, so I'm gon na put it on just a guy, show you guys and boom. It looks so good and then the ear tabs are popping - and one thing I do is got to be gluing it down. Here is a close-up of what it looks like it's super flat, as you can see, and these little like, I bleached the frontal when I got it, but just sometimes I don't it don't always bleach out. I'M gon na leave it on too long because I don't want to get brassy. I just peel amine pills, um, pluck some of the hairs out the front, and sometimes when I do bleach, my baby hairs will get a little bit on the on side and I don't necessarily like to just bleach over them because it looks as you can see. A little more natural when you put it on because some people's edges are a little bit more on the blond side, then they get black, so you just put plug some of them out, not all of them, but some of them and there you go hope you Guys enjoy