Tulle Shaker Hair Bow Tutorial.. How To Make Hair Bows. Diy Hair Bows Tutorial Laços De Fita:

Hi all today, I'm gon na show you how to make these gorgeous tulle bows with the little pearls in so like a shaker bow. I made these two layers. I did make one layer to begin with, which is okay, but I just felt that needed a little bit more bulk, so I added another layer at the bottom, so I was totally down to your preference, but I will just show you how I made this double One this one I made in this gorgeous maroon color, because my little girl is moving up to school September and she's gon na be wearing this color uniform and she loved these bows. So I thought I'd make her one with all different color little pearls inside. So the one I'm going to be showing you I'm going to be using pink tulle, that's quite hard to see someone a pink background, but basically I've got this roll of baby pink tulle. This was a six inch wide roll of tulle or around 15 centimeters, and that was a hundred-yard roll. I got this from. I believe I got this one from eBay, but if you go online and just look for 6-inch roll tool, you can get them off. Ebay Aliexpress there are other craft suppliers that also do this stuff, so you can just go online and look for that. So I've cut two pieces it's hard to see, but I've kept it to the six inch wide so just to show you that are still six inch wide or 15 centimeters wide and I've cut the first piece to 35 centimeters in length. So as 15 centimeters by 35 for one piece and then the second piece is also 15 centimeters, but this one I have cut to 43 centimeters in length. So, to begin with, taking your longer piece of tulle, so just to show you this is the 43 centimeter piece of tulle. I'Ve just popped some white paper on here, but obviously with this being a baby, pink and the background being a pink that was quite hard to show on the camera. So I hope you can see this okay, so taking the longer piece, I'm going to fold it in half so line the two ends up and then you're going to fold it in half again like that and then fold it in half again. So we've got three folds and then we're going to now cut this in half down the middle. So I'm just gon na fold that way and then, where this Center is I'm just gon na cut down that middle and then taking a pin. I'M just gon na pin this piece in place and set it to the side. While I sell the first half so, I've got a needle and double strand thread with a knot at the end, this side, which is folded. So you keep this nice side as the outside. This is going to be the inside of the bow, we're going to sew all the way across so going in one two, three, four, five, six, seven, eight pull that all the way through to form a pinch and then just go in and out across that pinch. A few times just to seal that off, I'm not going to cut the thread because I'm going to continue with the same piece of thread. So that's one half and this is going to be our base, bow so continuing with the same piece of thread. We'Re going to do the same 8, stitches, 1, 2, 3. 4. 4. 5. 6. 7. 8. Excuse the pen on my hands. It'S a permanent marker and I can't get it off so, as you can see the snow bringing these two sides together, but again before I do that, I'm just gon na seal this pinch off and then bringing those together flip it upside down. I'M just going to go in that bottom of that side and bring it to this side, bring them together. On this last leap, I'm just going to put my needle through there a couple of times and that will form a knot, pull that tight, and then you can cut off your thread now. This is going to be your base bow. So I'll just show you like on this one. So that's this bottom piece here and now we're going to make the top one with the little filling of pearls. So you can set your baseboa side and then taking your shorter piece, which is 30 centimeters you're, going to basically do the same thing, but we're going to sew all on the sides before we do the pinch in the middle and obviously Philip so again, you're going To fold in half once fold it in half twice and three times, I'm just gon na pop the pin in on that top end, because when they're going to cut this in half again, so we've got our two sides. So setting that piece down we're going to do this hard first now, this time, you're not going to sew down this side, we're leaving this side open we're going to stitch down both of these sides instead to form a seal, so we can pop in all our Little beads so coming in from the edge around half a centimeter. Obviously I want to catch all the layers and they're all a bit up and down they're, not totally even so I'd like to come in and it will bit to make sure I catch em. All I'm gon na go through this edge one two three times to begin with, just to catch seal on the end and then they're going to just go in and out all the way across and this time we're not doing a pinch. So don't pull it tight when you get to this end. So when you pull this through, you don't want to pull up to form a pinch. You want it flat and then you just go in and out on this end a few times to seal that off and then to make my knot. I'M just gon na go in now in through this loop, not cut that off. So I've just sealed this side and then we're going to do the same with the opposite side. Now we're going to turn this inside out, so we're this open end is known to just piss back in and now you've got like a little pocket to put in your beads. Now my beads, I thought this try here of all mixed, smaller ones, bigger ones these. This half is three millimeter. These are four millimeter beads and I've also picked out. I'Ve also picked out some of these pinks and hot pinks little flowers and a clear heart, so I'm gon na pop them in there first. So we're opening up that little pocket and pop them ones in there like that, and then I'm just gon na go around a mix of a few different things. Some of these peachy picnics around sort of a good half a teaspoon in there, not too many just enough for them to shake about about that. Many is fine. You'Ve got a nice little combination of different beads in there in this one. I used these ones here where you've got the greens and the Reds, and I also put a little bit of pink in somebody's blues, so I thought Venus has a darker color. The tool is darker. I want it to sort of a mix of color beads in there this one I'm gone for sort of more pinky colors and some of the Claire as well. So once we've filled that half I'm they're gon na, so this open pocket to form a pinch. So again, I'm going to go for eight stitches again, so one two three four five, six, seven eight and then put on all the way through and then again just seal off that end, and that is one half of your bow done and now we're going to Repeat the same steps with the other half and to try and put as the same amount of beads in we'll just do that by eye. You can measure yours out exactly if you prefer to do it exact, but I'm just gon na do mine roughly on the other half you and there you have your two halves of your shaker bow for the top layer. Now, while I still got this thread attached, I'm going to just sew them together, rather than glue them, you can glue them together. I just think that might be easy just to pop the needle through there. Well, I've got it still attached, just bring them together. That way, and then that is your little shaker, bow piece done now - we're ready to attach it to our bass, bow that we made earlier. So I'm just going to take my hot glue gun you pop some hot glue along that middle part and then just line that up in the clip I'm using today. If this double pronged 45 millimeter clip and I've already lined it with a 10 millimeter wide baby pink ribbon, you really want want it to match your bow as much as you can, because tool is quite sheer, although with the two layers that shouldn't matter too much So I'm going to stick that on my underside, so this is what we've got so far and now we're ready to add a centerpiece to wrap around my Center. I'M going for this gorgeous baby pink chunky, glitter I've cut a piece off centimeter wide by around five centimeters in length, just pop some glue on one end pop that in the center under my clip, and then I'm going to start wrapping that around and on this Front side I'm just gon na pop a bit of glue there and then we're going to finish off by putting a dab of glue on the end. And there you have your finished to shake a hair bow. I'M just gon na spread out the little bits in there, so you can see that look like so you can see the little flowers. You can see the little clear heart that we've got in there. The little girls love these bows. That'S the dark one that I made earlier for comparison. I hope you enjoyed this tutorial today if you've got any questions pop them into the comments below and I'll do my best to get back to you. Thank you for watching bye, bye,