Start To Finish Loose Deep Wave Wig Install|New Techniques|Wiggins Hair

Hey guys and welcome back to, i am beautiful, hustler tv. Today we are back with a new sponsor video and today's has provided by wigan's hair. So before we get into the actual wig, there are a few things as you've seen um that they included in this box. But of course the most important thing is the wig here and they sent me over this 13x6 um loose wave wig. It is so pretty y'all, it is so full it's a 250 density, and i love that this wig is true to length it's actually longer than what it says. It is like. It says it's a 26, but i'm telling y'all when i put this wig in it was definitely giving like 30 32 inches and i am five feet even tall. So well short, so it's really giving and it's also um true hd laser yeah. I see when i put that lace on my hand. It definitely disappeared, so i'm going to go ahead and show you a lot of things in this video y'all so um, i included some plucking, some bleaching knots new techniques, little tricks so um. This is what the wig looks like, so the first thing we're gon na do is go ahead and start by doing our watercolor method. So this is what the wig looks like y'all y'all knows the natural brown color. So, to get my jet black color, i'm going to be using royal navy and jet black, so i'm just starting by filling up my sink with some waters and i am using some hot water and i'm just pouring um that royal navy in there first. You don't want to put too too too much water because you don't want to dilute it too much but um. I took that royal navy and i'm just going to go ahead and dip the wig into that royal navy and once i finish dipping that and letting that sit for a little bit and just really going in and in and in i'm gon na. Also with that same water, take a bottle of that jet black color and then pour that jet black color in there mix it with that royal navy and dip that wig in there as well. But first i'm just making sure that i get this wig completely covered with that royal uh that royal navy color. But now i'm gon na go ahead and take the jet black and do exactly what i told you guys just pouring that gel black into that water. Mixing it up really good and then i'm going to dip the wig in there and let it sit for like three minutes so after letting that wig sit for a few minutes, i'm just rinsing it out keyword rinsing. I did not shampoo this wig. I am just rinsing the color out um as much as i can, and then what i'm going to do next is move straight into bleaching. The knots and you guys i've seen this trick um on tick tock, so i definitely wanted to give it a try and y'all know i'll, be willing to try the new stuff to let you know that actually works, so i'm gon na um. This part two of the video will actually be the bleach and the knots and the quick method that i use to literally bleach my sec uh bleach, my knots in 30 seconds. So, for starters, i'm using a bw2 powder and some developer and first i like to just comb all the hair down from um the wig, because y'all know how to leave out that little baby hair space, just comb everything backwards and i'm taking two scoops of my Powder and i'm just kind of like eye pouring the um, the developer and i'm just going to mix that in and guys you want it to be thick, not too watery because it will seep through and get on the hair and another trick that i like to Do now is use a butter knife to spread my um. What is it called bleaching powder solution because um it just makes it so much easier. So what i'm gon na do is take the butter knife and spread it at the front part. The top part as much as i can, but once i get to like the deep part, which is the six inches part, i just went back in with the brush and brushed the knots over well brushed a blush brush jeez tongue, tied brush the bleach over the Knots with that uh brush, but for that top part, like i mentioned, i will be using that butter knife. So now that i have that part done, i'm just gon na go ahead and go in with that brush and then spread. Those knots spread the bleach on those knots, so i know you guys are probably wondering what the hell is. She gon na do with this microwave but, like i said, y'all try this technique that i've seen trending on social media and, yes y'all. It actually works. So you want to put your wig into your microwave and you only want to go to 30 seconds y'all and i let this wig microwave for 30 seconds, and when i tell you, i pulled that wig out the knots were bleached in 30 freaking seconds. Okay, i know y'all see a little smoke um because you know that is that bleach heating up or whatever like that, but i want to just make this little disclaimer um. I all i did this method with the hair being wet um. Some people did it while it was dry, but i feel like doing it wet was just a little bit safer versus it just being like a dry wig that you put in the microwave. I don't know i just feel like it'll burn up that way, but i tried this method while it was wet, and this is what the knots look like after you know me rinsing out the bleaching powder and then i went ahead and bleached my knots and i Mean shampooed the wig or whatever, but here it is part three plucking, okay, so for starters, i like to just go ahead and pop my hair down the middle um. That way, if i decide to do a middle part, which i actually did today um, i won't have any bald spots or a really like too over plucked middle section, and even if i'm doing a side part when i pluck to the side um, i just kind Of like make a little part where potentially my side part would be, and then just do the plucking or whatever but um. What i like to do is just pull down the part, that's already pre-plucked and then i start plucking behind that area. But for starters, you really need some really good tweezers, and i showed you guys what the tweezers look like. Um. You need to make sure you are using those flat tweezers and you want to pull the hair straight back, not at sideways, but like straight back, but depending on when i get to the side, i do bring it sideways a little bit. But as far as like that middle top section, i just pull those hairs straight back, so i can see what i'm plucking and even though this is sped up guys. I recommend that you pluck slow light. Don'T try to go so fast because then you can definitely pull out some bald spots, and i know some people like to pluck while the hair is dry and some people like to plug while the hair is wet. But honestly, when you pluck, when the hair is wet, it comes out easier. So it is easier to create a bald spot. So just make sure you take your time and you really iron, where you're plucking and just thin those areas out little by little and also once i pluck behind the hairline. I comb everything backwards, just to see if it still looks thick and if it does. I just go in some more with all the hair pull backwards, but once again you do want to take your time with that, even though it does look like i'm speeding up just a little but um. That was just a quick little plucking tutorial. I'M not gon na go too much in debt, but this is what it looked like after i finished plucking everything and now it's time for the ball cap, so part four ball cap method. So for starters, i'm going with that 99 alcohol. I'M going to clean my hairline thoroughly and then i'm going to also take my beautiful hustle, skin protectant and spray. My hairline as well, and just rub that in real good on my edges and on my skin, where my wig can potentially lay and then we're going to blow dry that really quickly and then once i do that, i'm going to go in with my eat and Holding spray: this is my favorite one, the black one, the supreme and i'm just going to spray. My edges go on with the edge brush brush it back and then blow dry it down, and now that those edges are laid back, we're going to go ahead and put the ball cap over our head, i'm just going to kind of flip it backwards a little Bit so i can see what the heck i'm doing and i'm just going to cut open my ear tabs right there and then, of course, once i get my ears completely exposed out of the ball cap, i will go in with my adhesive and y'all know. I have been using a strawberry, sensitive adhesive, and just i want to give a quick thank you to all of my supporters who went and bought the glue um up like thank you guys, and i will be restocking again on the original smell, as well as the Strawberry, so just let me know like well, i will let y'all know when the next restock would be. But, however, i'm just taking a layer of that glue and i'm just going to spread it back and as it begins to turn clear, i'm just going to go in once again with that um even holding spray and spray it on top of that glue and just Blow dry that on the heat setting, so it can turn clear and be secured, and then i know we will go in with our scissors and definitely cut the extra cap off the front of the hairline and then go on with the ruby kisses foundation and apply The foundation all over the cap and now that the ball cap is done it's time to beat the face, and i did period yes, y'all it's time to give mua vibes y'all. It'S like. I just get better and better at doing my makeup, but nevertheless time to install so i took that ruby, kiss foundation applied inside the lace period per usual and now i'm just putting a wig on my head and just getting an idea pretty much how it's going To lay how it's going to look and then i'm going to go in with that um. What'S it called oh yeah, the lace glue, i'm gon na go in with the lace, glue and begin to add my layers, but first i'm just gon na quickly cut off the extra lace from around my ears. So when i do play uh place my glue down, it will lay down nice and flat. So once i cut the extra space or the extra lace off the side of my wig, i will go in with the lace glue and just do about three layers and just um. Let'S spray that out and of course, lay down a wig. So now i'm going to go ahead and lay down that lace right into that glue and just taking my fingertips and really pushing that lace in, like i always tell my subscribers, you guys listen beauties. It is hard doing your own wigs. So i know sometimes as influencers we make this [ __ ] look easy, but it's not okay, so um it requires you to be having a really good product to use that will keep your lace in place as you tack it down, because y'all know, usually when We do our clients, we have them hold each side down, but when you have an actual glue product that really works and really sticks, it is easy, a little slightly just slightly easier to install your own wig. So, as you can see, my wig is stuck so i'm just taking a blow dryer on the heat setting and just really blow drying that lace in and then i'm going to take my hot comb and hot comb that lace in as well. Just to give it a little extra melt security and then i would tie it down with the melt band. So now i'm going to go in with my scissors and y'all can see this hd lace is definitely hd lacing, because even though i have not cut the lace, you don't see it period, but i'm just going to go in really quick with the razor and just Raise off all the extra lace, i'm just pulling down what i see is not glued and then y'all know i'm gon na go ahead and raise all of that off, and then i will go ahead and part down my hair um, my hair down the center um. Well, pull out my yeah part it down the center pull out my baby hair sections and, like i mentioned yesterday, i don't know if y'all seen live or not, but i really hate how my baby hairs came out. I cut them absolutely too short on accident because i couldn't really see as well um. Usually when i do my installs, i have my mirror in front of me, but i was literally looking just in my phone camera and i cut my baby hairs too short. For my liking and um so yeah, i'm not really a big fan of my baby hairs today, you guys, but i still wanted to give you the content overall. Just make sure you cut your baby hairs at least an inch. I went shorter than the inch, which was my mistake: um not being able to see too lazy to bring my mirror from upstairs, but nevertheless um cut that extra lace tucked down anything that is still lifting and then i will go ahead and part. My hair down the center and pull out a section for my baby hairs and then um really get my top part laid light to the teeth and, of course, to get my top part really smooth and sleek. I will be using that wax. Stick in that hot comb and i'm just going to pull out the baby section, the baby hair section, which i'll do two baby hairs on each side, one in the temple area and then one for the sideburns. But i'm just also going to sleep that out really good and then i'm also going to part off sections at the top area and apply wax and just hot comb to get everything just really smooth and sleek. And i would do that on both sides. And, as i mentioned, i'm going to do the same thing to the other side and apply a little more wax just to get my you know just to get it really really sleek and just hot comb that down and then i'm going to take some more foundation And um even spray tap it across the hairline tie down my melt belt. Um come back on, do my baby hairs and then i will have to just like clean and conceal my part, and that will pretty much sum up this tutorial, and this is the mail. After removing the melt belt honestly, in my opinion, guys now that i'm looking at this video, i should have probably went in with the darker shade of the ruby kisses today. I use the level 15, but i feel like i should have went in with that level. 16 but y'all know i keep authentic and i keep it real and i try to learn from my mistakes. It'S just like. Sometimes when i use the level 15 it blends perfectly and then sometimes when i use 16, it blends perfectly. So i just usually grab between 14 and 16 for my installs, but you know i guess today. I should probably use level 16 to give it like that perfect, perfect blend, but nevertheless it still pretty came out dope and you know well, it pretty much still came out dope and you know, like i mentioned y'all, i was not a big fan of my baby Hairs today, but i did you know, go in and pluck them some and then just like once i cut it too short, it was a disaster, but you have to do the same thing to both sides. So i just had to you know i tried to make it work, try to make it work, but overall i still pretty much enjoyed the install just hated my baby hairs, but i love the wig super full. Like i mentioned, super soft um love, hd lash. I know we love us a good hd lace and a 13x6 partner space. I love that deep parting space, so um i still went in and you know, curled up the baby hairs and i'm just gon na scoop them real, quick, not on camera, because i really care for it like i mentioned, but just show you a little science science Sign and i'm gon na do the rest off camera. I went and did the rest of it offline but of course, last and but not least, i'm just taking the same foundation color putting it in my center part and then i'm just going to take my rat tail comb place it in the comb area well place. It the tail in the parting area and just quickly black spray around it to give a nice little um part or whatever, but don't spray too much. You don't want to get it on your lace, but um, i'm just taking a little more bio silk and just applying it in the hair and just leaving it in this nice little natural state um and i would drop you guys. A finished look video one with the shape of one and clearly one off because yeah it was given tacky with the shape of one. But this is what the hair looks like all around. Like i said y'all, this is a 26 inch, but it was given. 30, 32 type of eyes, i'm not even a lot of y'all super full and super pretty. This is a quick 360 and then i went in and with this part i did crimp the top part just a little bit, because it was a little straight, but this is what the hair looks like. I only did that top part, so the rest of it is the natural pattern. Super pretty still, you know, came out to be pretty nice, but thank you guys for watching see you next time.