How To: Set Up A Sewing Machine For Wig Making | Best Machine Patterns

Welcome to my channel, i'm sierra, and today i'm going to be showing you guys how to set up your singles heavy duty machine. This is a fast paced video. If you guys have questions. Please comment down below i'm going to just take you through step by step, how i set up my machine and to get my machine pattern set and in position and showed you how to load your bobbin and yeah so keep watching this video, like i said it Is in fast paced um, if you guys would like me to slow a do a slow pace, video, please comment down below i'll, be more than happy to help you with that all of your settings and how i set my machine will be down in the description Box below hope, you guys enjoy this video and continue to watch to get your machine set up properly. Okay, so right here, i'm pointing to the needle. This is your bottom needle and your presser foot and to release the presser foot. It'S a button behind your machine and then to put your presser foot back on you just lift it up and make sure it clicks. And then you have your bobbin cover down here at the bottom of your machine and inside of the bottom of your machine. You'Ll have some materials that you'll use or tools you would use to take off the cover of your actual bobbin and yeah. So that's a little tips on that and now i'm going to go into details on how you would put your thread. So when you put your thread - and you want your thread to be facing the back of your machine - that way, it's not getting jammed or out of place, so you want it to come from the back of the thread hole. So there you have your thread and then you're going to take it to the number one of your machine. You just follow the numbers and right now we're going to bob thread, our bob and sorry and then after we thread the bobbin i'll show you guys how to thread your needle. So, as you can see, i'm just putting in the thread into the top hole of your bobbin, the empty bobbin, and then you just hold it out to the side. And then you push over to your left and once you have it pushed over to your left. You'Re just going to let it go and then cut it off once it's totally full once it's totally full. It will stop moving completely as you can see it stopped and you cut it off, and then you have a full bobbin. So now i'm going to take the bobbin and in order to have your bobbin in correctly, to not mess up your tension, the perfect bobbin will go in as a p. So now, you're just going to take your thread from out of the circle piece and put it into one and the number two and go down your machine into three and then bring your needle up and then place it through the silver part. All the way down and then you're going to put it behind the number six and then down the bottom. You have a silver straight line that if your thread has to go behind there before you can thread your needle or your needle will not be threaded properly. So you want to always make sure you get close in and if you guys want, i can do another video and zoom in closely. But, however, it's pretty simple, you want to make sure it's always behind there. So what i like to do is put a piece of paper down pull down my needle as low as it can go, so i can put it through and then you put it through the hole and then your needle is all good to go for the top. Your needle is threaded so nice and simple, and now we're on to the bobbin to get the bobbin in perfectly. You want to put it in as a piece so perfect piece see, and then it shows you here on the cover of your bobbin cover. So this is just a close-up zoom that i wanted to show you guys of how to place your bobbin into the bobbin case to have a perfect bobbin. You want it to be facing in as a p, and then you put the thread to the side. Behind the loop inside of there hold out the top thread with your hand and then move the side of your will and then bring your needle down manually and pull. And then your thread will come out on top. And then you want to push everything to the back of your machine. So that's how you thread your bobbin. If you guys want me to do that in slow motion, i'll be more than happy to do that. But now i'm just testing out my thread and all my tensions and i'll do it in slow motion for you guys, like i said, comment down below. If you guys would like me to do a detailed video and not slow motion i'll, do it on a regular video, but this here was just a little tips and tricks to show you guys how to keep your machine from having that messed up tension and yeah And having the perfect bobbin, how to have it on a great setting, so the settings are down below i'm just showing you right here. This is your straight stitch. If you like to use straight stitch, this will be perfect and, like i said, the settings that i'll be using in this video are down below so be more than happy to check those out and comment down below some video ideas that you guys would like me To do for tips on machines or anything in general, but you just want to make sure you test out your stitching and your pattern before you get started with making anything on your machine. I hope this video helped you guys. Thank you so much for watching make sure you guys like comment and subscribe.