Easy How To Make A Seamless Tape-In Hair Extension, By Www.Hairweftingtape.Com

Okay, let's get started how to make a seamless weft using a bulk, beautiful hair and make a seamless weft just like this one that has been drying for a day and it's beautiful. It'S got no glue on the bottom and it's just absolutely a beautiful, perfect weft ready to be installed. Okay, let's get started first, you want to make sure that you have your half inch by 3-yard hair wedding tape. That'S what we're going to use today. You can always use the three-quarter inch if you'd like to have a little bit wider tape. It'S up to you and how you like to do it. You want to have your tape pre-cut and also have your hair right by you really dandy and handy, and you want to have a little bit: 99 % alcohol or pure acetone. Whatever works for you. Even Windex works just to keep your hands clean. A nice pair of scissors, that's great for cutting, and you want to go ahead, pull out the tape that you want. I have two side tabs that I like to use. Just you know for helping keep my fingers off the tape on the inside all right. Then you want to use your liquid gold bond to weave or ultra hold it's up to you. This is very convenient because of the tip applicator. You want to go ahead and I'm going to hold this down on the ends. I'M just going to take a little bit of this gold liquid gold glue and just spread it around like this, getting a lot right in the center of that tape. Okay, so we added a little bit of that. We'Re going to take just a little bit of this, some beautiful bulk virgin hair, I'm going to spread it out kind of fan it out. So we cannot have thick parts that don't get saturated with the bondo wave and you're going to just lay it in there nicely trying to keep the hair direction the same. You can always use things to hold down your tape, it does make it so it doesn't run away from you just press lightly and again the 99 % alcohol and a nice rag or cloth that you have is always nice to keep your fingers nice and clean. Okay, so once you have that laid in nicely gently patting, you want to go ahead and press lightly yet again and holding that down pressing with your fingers. Moving up is always best in case you get any glue, you don't want it to go into the hair and again just fanning out what you have. So I'm just going to make a small weft here, and you can do this, like I say, 12 inches wide. Then go back and cut whatever you like, so we're just going to lay this in here nicely all the way across and just lightly hold and lay it down. Okay, so that's beautiful! Now! This is one wept that I'm making and I'm making this a very nice thin, but yet has plenty of hair in it for one weft specially. If you're going to do as the sandwich method, you want to make sure you're using thin amounts of hair with your virgin bulk, loose hair. Okay, then you go back and just gingerly squeeze your glue. It doesn't run into your weft and right at the top. In the center top to Center, just go a bead all the way across making sure that you have good amount of bond to weave right where it needs to be. So when you squeeze your tape, it does saturate the hair so again pulling up and out so that way, you do not get any of that glue, see how this little piece right here. You want to lay your hand down and pull up and out. Okay. That way, you don't pull any of the liquid gold bond weave into your beautiful hair. Okay, so once you've done that you want to go back, get your pre-cut tape and get it ready to then lay right over there and that's going to be one weft. One seamless wept and I'm going to go right at the bottom of where the other tape is and gently push on the ends. Gently lift your finger up because you want to gently do this because you do not want the liquid go bond away to come down or run down into the bottom of the weft. So, just I'm patting very lightly patting very lightly going up there. You go and this way all that bandha weed gets nice and saturated in that hair inside the tape, and you know you're going to have a great weft and once it's done, you can for sure no you're not going to have any shedding as long as that. Liquid gold, bandha weed is spread out. Okay, so again you want to let that sit, a good 24 hours the longer you wait to let it dry the better and if you get any glue coming down into here, if you get any globs any you know, because you press too hard. The trick is this: 99 % alcohol pure acetone, on a q-tip just dabbing, okay, so that one's done and we will go on to the next one and let this dry and then once it's dry, we're going to come back in about 15 minutes and press down On it and then we'll come back and cut the top off and let it dry good 24 hours. Okay, that is a beautiful seamless left there we go using beautiful, beautiful Brazilian 15 minutes. I came back and just kind of squish and tap so you want to go and cut the top off. This is another weft I made since I'm making a few of them. I'M going to show you, you just cut all that off and when you get the glue and the hair on your scissors, you want to definitely keep those clean with the 99 % alcohol, Windex or pure acetone. That'S just the way to do it. So then, you have a beautiful weft all done ready for the install, also it as a little tip and a trick. If you have an area that you feel did not get enough glue and when you look at it, you can actually see here again. If you think that there's a space or a gap that you missed with the glue, you can always take your liquid gold bond weave and just make sure that you have nice clean, make sure the tip is clean of everything you can always go back and right At the top push into the tape and give a little squeeze and that will definitely fix that area you then you just let it dry and then go back and cut it okay. So what you can do here - and this is for a seamless web. So again we want to take art, liquid gold glow and run a bead across all the way and get it nice and all in the middle and up at the top. So it will then go down to the bottom, but not run right into your weft. Yet again, so you want a good amount. Okay, so again we want to make sure this is where you like it now this one. What you do is again a lot of people don't mind adding this, because they don't want to lose the length right like this, because a lot of machine left it has a beard. Hairs is what we like to call them. I like to go below that. So you don't have anything that you're not using in light. So again you want to push that right to the top and lay it down nice and gently just like that, and you can do this color all the way across or I'm going to show you what to do if you're doing a piano color. So now we're going to use a blonde the doing the very same thing and again you can do this, whatever you like, we did it with the bulk hair. So now I'm going to do it again. Here'S what a piano color looks like, and this now will lay right in there and gently patting and again one more going across and right above because I'm not minding losing the length of the weft. I am definitely going up higher and this is for the purpose of not getting into the beard hairs and, as you notice, the beard hairs in this one's down to here and the hair extra hair that has been weaved is only up to here. So you could bring this down actually, but I just wanted to show that this is definitely the way you can just leave out those hairs. If you don't mind losing some of the light again, you want to just lay it in there and voila. Now we have a piano colored weft, all the way across. So now you want to lay that down and of course you can do this. However, you like in smaller sections, bigger chunks like this one's bigger and it comes out just beautiful. So once you do that again, you want to take your bead of liquid go bond. We'Ve go right to the top, basically in the middle top middle, getting every little line all the way across every little area being saturated with that bandha wave, because if you don't it can shed. This is specialty, hair, wedding tape with two tapes in one, and you definitely need the bond to weave to help bond the hair together, but the tape is what holds it all together. That'S the nice trick, so I'm going to stop here. I love this. This is great. If you want to keep going add more colors, then you would again do this all the way across and then add another little bit of glue. But remember when you do that and if you, the thicker, you make it it's going to be a thicker weft. So if you're doing sandwich method, you want to stick with just doing it like this. You can, however, use two F's all the way across it's up to you. So again, we're going to go right to the bottom and gently tapping, so this spreads it out when you tap in the middle and tap at the bottom, keeps it from going in and out there we go and again this is a seamless weft using your machine. Weft and again, if you get any at the bottom, tap it with a 99 % alcohol or pure acetone always helps break it up. It'S hard to be perfect, but we try and it's a beautiful left yet again and if you do that, you don't want to necessarily do the 99 % alcohol or anything down here useless as the part that goes to the back of your head and the other One to sandwich, then that way you don't have to worry about it necessarily. Okay, so here is how you do it and again this one's done. Let it dry 24 hours before you apply it and go back cut off the top and 15-20 minutes. You want to go back and really squeeze that again going up the more you squeeze it. It flattens. It makes it nice and tight and it makes it a smaller left. Also I like to use sometimes when I'm doing this, if I really want to just do it once all the way, once it's dry a little bit more, I can just do this and press down and then that way it squeezes it all up. Okay, so there we go that one's done and I'm going to come back in about 15 minutes and cut off the top. And now we have a beautiful piano, colored, seamless, weft, beautiful, just I've showed you other ways to make that machine. Wefted, seamless weft, I'm going to show you another little way to do it again. We'Re going to use some of this machine, wafted hair, and I don't like the beard hair. So I'm going to go below it because I don't mind losing length. Now I'm going to go above the little beard hairs this and this wife they go down to here. So I'm going to lay that right about there and just tap that in nicely and let it sit for a second here tapping tapping. So it really sits in there and I'm going to go back. Add a little bit of this liquid gold bond to weave right across again nice and saturated, and then this time I'm going to throw another one right on top. This is what's nice about using machine wafted, it's just a lot easier and quicker to lay down then using bulk hair so because you can hold it from the top and then tap so now we have two of these wefts. That'S pretty much the best amount of hair, I would say for any small half inch. If you're going to use more you're going to need more tape, I would use the three quarter inch tape and then that way you have more room to add more glow. If you're going to use more than two left's so with just two wefts to machine, wife's, hair and or any kind of bulk hair, this is plenty for the half inch and again right at the bottom. Pushing up and now we'll have a beautiful two machine. Wife, thick seamless, left and again let it dry 24 hours and you will have a beautiful thin weft beautiful will come back cut the top off trim it and it's ready for the install in 24 hours, beautiful, okay, using your 1/2 inch tape, another fun seamless weft To make is you can use a Tipton hair extension to any color? Any texture go ahead. Take that make it exactly the same way you did with your machine waft by you, know, placing the Glick wood gold glue right across top Center and all the way, and just really getting it nice. With that liquid gold glue on to weave and now you can take two tips at a time and just place it right above that - and this is a great idea to take tip care. If you don't want to wear the tips and make your own seamless, hair. Wefts extension you're going to do that, the very same way you do using bulk hair or, if you'd like you, can just cut them all off and do it just like you do in a bulk hair or do it this way, you can just lay it right Out you can also with that said, um do anything you like you, can be very creative. Go ahead. Add the you know different color. If you want lay that in there now, you have machine, weft, tipped, hair and any kind of bulk hair, any kind that you like um, you can make any wet it. You know it's really up to you and what you like and how you'd like to wear them. I just think it's so much fun to be able to use tipped, hair or machine wifed, hair or bulk hair. I'Ve made hair wefts that have had three different textures in it just because I liked the way the movement was and the colors. So again it's up to you and but just it's just another great fun, creative way to make a seamless weft. So again, you want to just take your flick of Gold Bond weave and I'm going to take this one and run it right across the top of this one quickly. Just to show you one more fun way to make a cute little weft and with my pre-cut tape, just going to lay it down just like that and again all going to the top. You can get pretty quick at this and what, after you, do in a while I've been doing it for quite a long time, so I get it done pretty quickly, as you can see where others may be. The first time might just take a few minutes to just do it slowly. So again, you want to make your weft any colors any textures, just let it dry tapping so the glue and the bond goes up. Always if you get any glue down here, always move your hand up in the up direction, and that way you know that you won't get any of that down in here again. If it does get in here, 99 % alcohol, pure acetone, always with a q-tip, will definitely break it up and you can pretty much get it out of the hair. Okay, let that dry 24 hours cut off the top, come back in about 15-20 minutes and really tap it down and then really squeeze it. So it really holds together, okay, beautiful just one more way to make a fun weft using tipped hair and machine weft, hair or, like I said, bulk hair left. Okay in this clip we're going to show you how to use ultra hold and it's a little different, because you're going to be using this mono jet - and this is nice for people who want to have a really just a clear if they're worried about it. A clear weft and you just pour a little bit here in the top, and then you know whatever you use, you can actually pour back in if you um, don't use it all up. So I'm going to pour in a little bit hair just to show you. I'M holding it at the bottom, so it doesn't run out then tip it up and then push and you want to have a little area. So what you're going to do with this is go not too quickly because see, as you can see, it kind of you know, really gets stringy. So I'm going to dab it a little bit of alcohol and push the air out. You want to push that air out because you don't want it to go into your weft. Okay, so run your bead all the way across just like this nice and slow, because this is thinner and it does run so it will run into the weft. So you have to, you know, definitely go slow while you're doing it. Okay, so once you apply that you want to go ahead, have your ready - and you know we're going to make a bulk loose hair a seamless here and again just lean it right across Fanning your hair out, and it definitely just tapping down - and this will definitely With with blond hair, it's kind of nice because it's clear, it's definitely going to be a clear weft. So that is the benefits. If you do not like amber at all, that's the benefit of using this, and you have to definitely let this dry good 24 hours for it to really bond and work. Well, it's definitely highly stinky compared to liquid gold bond away. So you must have a fan: going always have your extra tape cut and again right at the bottom and just lightly tapping all the way across, because you don't want it to fall back in and because it is a definite you can see it's already coming down, Because it's so much thinner, then liquid gold bond to weave it will really be runny, so you want to tap it slowly. As a matter of fact, it's actually better just to let it sit for about five minutes. You know two to five minutes then come back and really then lightly run your hands across. If you don't want it to come down like it's starting to do right now, because it's so right, but it's a wonderful way to make a seamless weft. If you don't have liquid gold glue and it makes it nice and clear okay so that wept we are going to let sit and then we'll come back and then prep Pat and press lightly, and this will be a seamless, clear, bulk, loose weft, beautiful okay in This clip, I wanted to show you how to trim down a weft that I've worn and used and taped and retake tanned worn for a good six months. What I do this one's dry, because I have another installing right now I like to go back before I install it ever again and I like to trim it down. I don't mind losing a little bit of the length. Sometimes I use these pieces for side pieces, but you can go ahead, cut all the extra tape. That'S there and glue, and you know as long as you don't go too low into the weft, you don't want to hurt the integrity of your wet. The strength of your weft, so you want to go down as as far as you can and really when it's dry, it's so much easier to go back and then trim it down. As far as you can on front and on back side of your weft and then when you're re wetting retaping to apply this way, you don't have it's still thin, you want it to be as thin as you can possibly wear it and make it. This was a lot of hair. As you can see, this is a lot of hair in one left, so I have to make it a little bit thicker than most so I but, like I say I apply using liquid gold glue to the hair for my installs. I don't do the sandwich method because I do wear so much more hair and in the wait. So here again I'm just trimming off the back and as you can see, this is quite a bit of tape and glue that you don't have to necessarily retake. So the thinner you can make your weft the better and then retype it, and then you can reinstall it like. I say this one's been cut, trimmed down six months, I've been wearing the same beautiful virgin, hair extension, and I just do this every time I trim it down, retype it and then it's nice and beautiful thin right to my head again. So, as I'm talking, you can see I'm just trimming across and just really given it the old trim down okay, so this one's now nice and trimmed down and okay. So I've been trimming as much as I can off and you know still leaving the integrity of the weft together, because you want to make sure that it does not fall apart. I'M leaving this here because I want it to be one big waft and then I'll cut it later. But together it is nice trim down ready for retaping. So again you want to take your liquid gold. Mondo wave is what I do. I'M just going to show you real, quick, the tip and trick what I do. I just take it run. A little bit of glue doesn't have to be a lot because we're not making a new up just a little bit and then I go ahead and I lay that pre-cut trim down weft right in that tag and actually the top part. I just take a little bit because I'm going to take another piece - and I just take a little bit of glue just like that right across the top and again cut my tape. Lay it right on top and now just that quick. My weft is ready for an install and you don't have to wait with this because it's already dry, the seamless is made it's just trimming it down so now after I make this whole wept, and I really press hard. Of course, you can always take a piece of trim, anything and just press on it and make it nice and tight, and then I go back because it is thinner than this half inch and I just cut right off the top right, the top right off there. You go right off there and now this weft is ready to be installed. Reinstalled and again, I've worn this for six months and it's still going strong and it's beautiful literally. This was the dark Brazilian hair that was lifted to my colors, and so this weft is ready to go and to be reinstalled there. You go beautiful little tip and trick on how to just trim it down, retype it and apply just that nice, beautiful